Dispenser Content For I-Dos Iiw - Bosch WAW32899SN Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Intelligent dosing system
en
My water hardness:
Below is an example of detergent
dosages on a packaging label:
Degree of soil-
ing →
Water hard-
ness ↓
soft/medium
55 ml 75 ml 120
hard/very hard 75 ml 95 ml 150
The default setting for the basic dosage
is set specifically according to the area
in which you live (e.g. 75 ml for
detergent and 36 ml for fabric softener).
Set the basic detergent dosage
according to the detergent's packaging
label. Take your water hardness into
consideration when doing so.
Select the basic fabric softener dosage
according to how soft you would like
your laundry to be.
Changing one basic dosage affects all
three dosage quantities in the same
way.
Notes
Reduce the basic dosage if using a
very concentrated detergent.
48
160
ml
ml
180
ml
ml
If large amounts of foam are
repeatedly created during washing,
please check your basic dosage and
dosage quantity settings.
Certain types of liquid detergent can
also create excessive amounts of
foam. If your basic dosage and
dosage quantity settings are correct,
we advise you to use a different
detergent.
Changing the basic dosages:
Appliance settings ~ Page 50
Dispenser content for
i-DOS iIw
Instead of fabric softener, a second
liquid detergent can be used in the i-
DOS iIw dispenser.
Notes
When switching the i-DOS iIw
dispenser content from fabric
softener to detergent, the basic
dosage for detergent is set to factory
settings for this dispenser and the
dosage for this detergent is set to
off for all programmes in which
intelligent dosing can be used. Then,
using the i-DOS iIw button on the
display panel, select the detergent
dosage (low, medium or high).
~ Page 25
The i-DOS w dispenser is
automatically deactivated if
detergent dosing is activated for the
i-DOS iIw dispenser.
The settings for this programme are
saved until they are changed.
When switching the i-DOS iIw
dispenser content to fabric softener,
the basic dosage is set to factory
settings and the dosage is set to
"normal" for all programmes in which
intelligent dosing can be used.
Switching the dispenser content
requires additional confirmation via
the display panel.

Advertisement

Table of Contents
loading

Table of Contents