Step 5: Starting The Drying Programme; Step 6: End Of The Drying Programme - Hisense DHGA901NL User's Operation Manual

STEP 5: STARTING THE DRYING PROGRAMME

Press the button (3) START/PAUSE.

STEP 6: END OF THE DRYING PROGRAMME

At the end of the drying programme, »End« will appear on the display unit
indicator lights will light up, and the (3) START/PAUSE button light and ANTI CREASE (10a) time
indicator, if activated or selected, will flash.
1. Open the dryer door.
2. Clean the filters (see section »CLEANING« ...).
3. Take the laundry from the drum.
4. Close the door!
5. Switch off the dryer (press the (1) ON/OFF button).
6. Empty the condensate tank.
7. Unplug the power cord from the outlet.
After the end of the drying programme, immediately remove the laundry from the dryer to
prevent it from creasing again.
38
3
1
, the two red