4. O
PERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the
display.
Menu Branches
The menu structure of the Scorpion™ GVC/RVM/RGY fixtures has seven branches,
as follows:
•
•
•
•
•
•
•
•
•
Changing Options on the Current Menu Branch
To change an option on the same menu branch, do the following:
1) Press <MENU> once (the LED display will blink).
2) Press <UP> or <DOWN> until the desired menu option shows on the LED
3) Press <ENT> to accept the new option (the new option will show solid on the LED
Changing Options on a Different Menu Branch
To change an option on a different menu branch, you must exit the current branch.
1) Press <MENU> once (the LED display will blink).
2) Press <MENU> repeatedly until seeing the active option of the desired menu
3) Press <UP> or <DOWN> until the desired menu option within the new menu
4) Press <ENT> to accept the new option (the new option will show solid on the LED
Page 14 of 26
Button
Function
Press to find an operation mode or
<MENU>
to back out of the current menu
option
Press to scroll down the list of
<DOWN>
options or to find a lower value
Press to scroll up the list of options
<UP>
or to find a higher value
Press to activate a menu option or a
<ENT>
selected value
Auto/Sound (13 option)
Laser Sky Color (4 options)
Laser Sky Effect (1 option)
Sound Sensitivity (10 options)
DMX address (503 options)
Slave (1 option)
Reverse (2 options with two values each)
The control panel will remember the last setting you programmed, even
after you have turned the fixture off.
In addition, the control panel will remember the last selected option from
each menu branch.
display.
display).
branch.
branch shows on the LED display.
display).
Scorpion™ GVC/RVM/RGY User Manual (Rev. 02k)