Intercom - Panasonic KX-TGC364 Operating Instructions Manual

If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed on the
handset that is in use after you hear the call
waiting tone.
1
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing (for
rotary/pulse service users)
Press * (TONE) before entering access
numbers which require tone dialing.
Call share
While you are on an outside call, another unit
can join the conversation. Only 2 units can join
an outside call.
Note:
R To prevent other users from joining your
conversations, turn call sharing mode off
(page 19).
Transferring calls, conference
calls
1
During an outside call, press
MINTERCOMN.
When 3 or more handsets are
registered:
MbN: Select the desired unit. a MSELECTN
2
Wait for the paged party to answer.
R If the paged party does not answer,
press M N to return to the outside
call.
3
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: "Conf." a MSELECTN
R To leave the conference, press MOFFN.
For assistance, please visit http://shop.panasonic.com/support
TGC35x_36x(en)_1116_ver012.pdf

Intercom

Making an intercom call
1
13
Making/Answering Calls
R To put the outside call on hold:
MMENUN a MbN: "Hold" a
MSELECTN
To resume the conference: MMENUN
a MbN: "Conf." a MSELECTN
R To cancel the conference: MMENUN a
MbN: "Stop conference" a
MSELECTN
MINTERCOMN.
When 3 or more handsets are
registered:
MbN: Select the desired unit. a MSELECTN
13
2015/11/16 9:16:36