Dealer Check Lists 15 - Woods BSS54 Operator's Manual

PRE-DELIVERY CHECK LIST
(Dealer's Responsibility)
Inspect the equipment thoroughly after assembly to be
certain it is set up properly before delivering it to the
customer. The following check list is a reminder of
points to inspect. Check off each item if it is found satis-
factory or after proper adjustment is made.
___ Check that all safety decals are installed and in
good condition. Replace if damaged.
___ Check all bolts to be sure they are properly
torqued.
___ Check that all cotter pins and safety pins are
properly installed.
DELIVERY CHECK LIST
(Dealer's Responsibility)
___ Show customer the safe, proper procedures to
be used when mounting, dismounting, and
storing equipment.
___ For mounted units, add wheel weights, ballast
in front tires, and/or front tractor weight to
enhance front end stability. A minimum 20% of
tractor and equipment gross weight must be on
MAN0761 (11/14/2008)
DEALER CHECK LISTS

Dealer Check Lists 15

front tractor wheels. When adding weight to
attain 20% of tractor and equipment weight on
front tractor wheels, you must not exceed the
ROPS weight certification. Weigh the tractor
and equipment. Do not estimate!
___ Show customer how to make adjustments.
___ Present Operator's Manual and request that
customer and all operators read it before oper-
ating equipment. Point out the manual safety
rules, explain their meanings and emphasize
the increased safety hazards that exist when
safety rules are not followed.
___ Point out the safety decals. Explain their mean-
ing and the need to keep them in place and in
good condition. Emphasize the increased
safety hazards when instructions are not fol-
lowed.
___ Explain to customer the potential crushing haz-
ards of going underneath raised equipment.
Instruct customer that service work does not
require going underneath unit and never to do
so.
