CLEANING
After Each Use
Remove large debris such as clumps of dirt, grass,
●
crop residue, etc. from machine.
●
Inspect machine and replace worn or damaged parts.
Replace any safety decals that are missing or not
●
readable.
Periodically or Before Extended Storage
Clean large debris such as clumps of dirt, grass, crop
●
residue, etc. from machine.
Remove the remainder using a low-pressure water
●
spray.
1. Be careful when spraying near scratched or torn
safety decals or near edges of decals as water
spray can peel decal off surface.
2. Be careful when spraying near chipped or
scratched paint as water spray can lift paint.
MAN0761 (11/14/2008)
3. If a pressure washer is used, follow the advice of
the pressure washer manufacturer.
●
Inspect machine and replace worn or damaged parts.
Sand down scratches and the edges of areas of
●
missing paint and coat with spray paint of matching
color (purchase from your dealer).
Replace any safety decals that are missing or not
●
readable (supplied free by your dealer). See Safety
Decals section for location drawing.
STORAGE
Block equipment securely for storage.
Keep children and bystanders away from storage
area.
To help prevent injury caused by a falling imple-
ment, always detach on a hard level surface.
Do not climb or lean on stored equipment.
Operation 11