Table of Contents
Advertisement
Methods for Cleanness and Maintenance
Before cleaning, please unplug the cooker and make sure the ceramic board is not hot.
Ceramic panel and control panel
Slight dirt: please clean with soft wet cloth.
Oily dirt: clean with soft wet cloth dipped in little toothpaste or neutral
detergent and clean with soft wet cloth until no residue exists.
During the cleanness, never clean the cooker surface with a rigid brush.
The induction cooker body shall be cleaned lightly with flexible dry
cloth.
The dust around the air entry and air vent can be cleaned with a
flexible brush or cleaner.
If there is improper connection between the plug and the socket, the
induction cooker may be easily damaged. Therefore, please check the
plug and socket for contact condition before use.
Never pull out the plug when the induction cooker is operating. You
should press the "ON/OFF" button first and then pull out the plug after
the induction cooker enters the state of standby. This will contribute
to prolonging the service lifetime of the induction cooker.
Please unplug the unit after use.
Trouble shooting Guide
p r o b l e m
After power is supplied, the "ON/OFF"
indicator lamp fails to light up
The "ON/OFF" indicator lamp lights
up, but heating does not start
P o s s i b l e c a u s e
Whether the plug is inserted tightly
Whether the switch, socket, fuse and
power line are in good condition
Whether the pot materials are acceptable
O t h e r r e a s o n s , c o n t a c t t h e s p e c i a l
maintenance department
8
Advertisement
Table of Contents
