iLive Platinum IAHP86B User Manual

iLive Platinum IAHP86B User Manual

Wireless noise canceling headphones

Advertisement

Quick Links

Wireless Noise Canceling Headphones
User's Guide for Model IAHP86B

FCC Warnings

Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Features

• Supports Bluetooth
• Wireless range: 33 feet
• Built-in microphone
• Micro-USB port for battery recharge
• Aux in (3.5mm audio input)
LEFT EARCUP CONTROLS
Volume +/-
Press to adjust volume level.
Power/Pair/Play/Pause/Speakerphone
Press and hold for 4 sec. to turn the unit on and begin pairing.
Press and hold to turn OFF.

Orientation

• Folding adjustable headband
• On-ear controls
• DC battery power: built-in
rechargeable lithium ion battery
• Battery life: approx. 8 hours
Bluetooth
LED Indicator
Mic
Aux In
Micro-USB
Charging Port

additional Warnings and PreCautions

• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume
until you reach a comfortable listening level.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed
of according to state and local guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known to the State of California to cause birth defects,
or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Includes
• Micro-USB to USB charging cable
• 3.5mm audio cable
• Hard carrying case
RIGHT EARCUP CONTROLS
Indicator Light
Noise Canceling
ON/OFF

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Platinum IAHP86B and is the answer not in the manual?

Questions and answers

Summary of Contents for iLive Platinum IAHP86B

  • Page 1 Wireless Noise Canceling Headphones User’s Guide for Model IAHP86B FCC Warnings additional Warnings and PreCautions Warning: Changes or modifications to this unit not expressly approved by the party responsible for • To avoid hearing damage, make sure that the volume on your music player is turned down before compliance could void the user’s authority to operate the equipment.
  • Page 2 Charging the Battery Bluetooth Wireless Audio Pairing to a Device and Playing Audio Requires a Micro-USB to USB cable (included). 1. Using a Micro-USB to USB cable (included), connect the larger USB plug After initial pairing, the unit will stay paired unless unpaired manually by the user, to the USB port of a powered on computer or USB power adaptor (not or erased due to a reset of the device. If your device should become unpaired or included). you find it is unable to connect, repeat the steps listed here. 2. Connect the smaller Micro-USB plug into the Micro-USB port on the unit. 1. Press and hold the Power/Pair button on the unit for approximately The unit will now charge. 4 seconds to power the unit on and begin pairing. The pairing indicator will begin flashing red and blue.

Table of Contents