Subscribe to Our Youtube Channel
Related Manuals for iLive IAHRF79B
Summary of Contents for iLive IAHRF79B
- Page 1 User’s Guide for Model IAHRF79 v2258-01 IAHRF79-2258-01-IB - 20Dec2018.indd 1 12/20/2018 1:37:22 PM...
- Page 2 SAFETY WARNINGS FCC WARNINGS • WARNING: Where the mains plug WARNING: To assure continued operation, or appliance coupler is used as the follow the attached installation instructions disconnect device, such disconnect and use only shield cables when connecting device shall remain readily operable. to other devices. Changes or modifications not expressly approved by the party • Risk of electric shock. Grounding responsible for compliance could void the continuity must be maintained. user’s authority to operate the equipment. • Lithium batteries, like all rechargeable NOTE: This equipment has been tested and batteries, are recyclable and should found to comply with the limits for a Class be recycled or disposed of according B digital device, pursuant to Part 15 of the to state and local guidelines. They FCC Rules. These limits are designed to should never be disposed of in normal provide reasonable protection against harmful household waste, and they should interference in a residential installation. never be incinerated, as they might This equipment generates, uses, and can explode. Contact your local government radiate radio frequency energy and, if not for disposal or recycling practices in installed and used in accordance with the your area. instructions, may cause harmful interference to radio communications. However, there is • Only use the included power supply or no guarantee that interference will not occur...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Introduction - 4 Features Includes Overview Headphones - 5 Base - 6 Control Functions - 7 LED Indicator Lights - 7 Setup Base Power - 8 Headphone Charging - 9 Digital Optical Audio - 10 RCA Stereo Audio - 11 Coaxial Audio - 12 Line In - 13 Listening Pairing the Headphones to the Base - 14 Troubleshooting - 15... -
Page 4: Introduction
INTRODUCTION Trying to do some around-the-house chores and still want to listen to the TV or your favorite music? These wireless headphones allow freedom of movement while maintaining excellent reception. Features » Digital 2.4GHz wireless connection » Up to 100ft transmission distance without line of sight limitations » Compatible with any media device with a 3.5mm audio output, digital optical audio output, or coaxial output » No voice or picture latency » Comfortable, noise isolating earcups » Rich sound and deep bass » Fold-flat design for convenience on-the-go » Transmitter base also serves as a charging dock for the headphones » Built-in rechargeable battery: approx. 7 hour battery life Includes » Optical audio cable » 3.5mm stereo audio cable » RCA to 3.5mm stereo audio adapter cable » Micro-USB charging cable » AC/DC power adapter » User’s Guide » Warranty IAHRF79-2258-01-IB - 20Dec2018.indd 4 12/20/2018 1:37:22 PM... -
Page 5: Overview
OVERVIEW Headphones 1. LED Indicator 2. Power/Pair Button 3. Volume Control 4. Aux In (3.5mm audio input) 5. Micro-USB DC Charging Port 6. Headphone Charging Contacts IAHRF79-2258-01-IB - 20Dec2018.indd 5 12/20/2018 1:37:23 PM... -
Page 6: Base
OVERVIEW Base 7. Charging Contacts 8. LED Indicator IAHRF79-2258-01-IB - 20Dec2018.indd 6 12/20/2018 1:37:23 PM... -
Page 7: Control Functions
Control Functions » Power » Volume Press and hold to power ON Press up or down to adjust and OFF. volume level. » Pair Press to pair to the headset base (see pg. 14 for pairing procedure). LED Indicator Lights » Headphone Functions Flashing Blue - Wi-Fi connecting Solid Red - Battery charging » Base Functions Solid Red - Charging headphones Solid Blue - Media source connected Flashing Blue - Media source not connected IAHRF79-2258-01-IB - 20Dec2018.indd 7 12/20/2018 1:37:24 PM... -
Page 8: Setup
SETUP Base Power Connect the DC Power Input on the base to a standard power outlet using a DC Power Adapter (included). The base must be connected to a power source and powered ON to transmit audio to the headphones. IAHRF79-2258-01-IB - 20Dec2018.indd 8 12/20/2018 1:37:24 PM... -
Page 9: Headphone Charging
Headphone Charging There are two ways to charge the headphones. » Place the headphone on the base so that the charging contacts are aligned. » Use a Micro-USB to USB cable (included) to connect the DC Input (Micro- USB) on the headphones to the USB port on a powered on computer or USB power adapter (not included). A fully charged battery will provide up to 7 hours of playtime. Battery life will improve at lower volume levels and decrease at higher volume levels. Headphone & Base Battery Status Indicator Light Red light ON Charging battery Light OFF Charging DC Input complete USB Power Adapter (not included) or Transmitter Base powered ON computer (not included). IAHRF79-2258-01-IB - 20Dec2018.indd 9 12/20/2018 1:37:25 PM... -
Page 10: Digital Optical Audio
CONNECTING AUDIO Digital Optical Audio Requires a media source with an Optical Audio Output and a Digital Optical Audio Cable (included). 1. Using a Digital Optical Audio Cable, connect the Optical Output on your media source (TV, amplifier, etc.) to the Optical Input on the base. 2. On the connected media source (TV, amplifier, etc.), make sure the audio settings are set to PCM or Optical Audio. 3. Audio played through the connected media source (TV, amplifier, etc.) will now be sent through the base. Important tips for optical audio: » Use the correct Optical cable and make sure that it is firmly seated in the Optical Input/Output sockets on the base and the media source. » Optical audio output is activated from the media source (a red light should be visible from the Optical socket). It may be labeled SPDIF in the setting menu of the source. » The optical output source should be set to output PCM and not Dolby Digital. Optical Input Optical Output IAHRF79-2258-01-IB - 20Dec2018.indd 10... -
Page 11: Rca Stereo Audio
RCA Stereo Audio Requires a 3.5mm to RCA stereo audio cable adapter and a 3.5mm audio cable (included). When connecting an RCA stereo audio cable (Red/White), match the colored plugs to their corresponding ports. 1. Using a 3.5mm to RCA Stereo Audio Cable (included), connect the RCA Stereo Output on your media source (TV, amplifier, etc.) to the Aux In (3.5mm audio input) on the base. 2. Audio played through the connected media source (TV, amplifier, etc.) will now be sent through the base. Aux In RCA Stereo Output 3.5mm audio cable RCA to 3.5mm cable IAHRF79-2258-01-IB - 20Dec2018.indd 11 12/20/2018 1:37:26 PM... -
Page 12: Coaxial Audio
CONNECTING AUDIO Coaxial Audio Requires a media source with a Coaxial Audio Output and a Coaxial Audio Cable (not included). 1. Using a Coaxial Audio Cable, connect the Coaxial Output on your media source (TV, amplifier, etc.) to the Coaxial Input on the base. 2. On the connected media source (TV, amplifier, etc.), make sure the audio settings are set to Coaxial Output. 3. Audio played through the connected media source (TV, amplifier, etc.) will now be sent through the base. Coaxial Input Coaxial Output IAHRF79-2258-01-IB - 20Dec2018.indd 12 12/20/2018 1:37:27 PM... -
Page 13: Line In
Line In Requires a 3.5mm audio cable (included). 1. Connect a 3.5mm audio cable to the Line In on the base or the headphones and the audio output/headphone jack on an audio device. IAHRF79-2258-01-IB - 20Dec2018.indd 13 12/20/2018 1:37:27 PM... -
Page 14: Listening
LISTENING Pairing the Headphones to the Base Note: After the initial pairing, the headphones will stay paired to the transmitter base. It will not be necessary to reconnect each time you use the headphones. 1. Press and hold the Power/Pair button to power on the headphones. 2. Press the Power/Pair button again to begin pairing. The headphones will automatically detect the base and connect to it. 3. After a successful connection, the LED on the headphones will slowly blink blue. The LED on the base will turn solid blue. 4. When you are finished using the headphones, press and hold the Power/ Pair button to power them off, then place them on the base to charge the batteries while not in use. IAHRF79-2258-01-IB - 20Dec2018.indd 14 12/20/2018 1:37:27 PM... -
Page 15: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE SOLUTION Unit will not power on » Make sure the headphones’ battery is charged. Recharge if needed. Audio distortion » Volume on the headphones or the connected device may be too high. Reduce the volume of one or both of the devices. Headphones won’t play » Make sure the volume on the headphones is or fails to connect turned up to an audible level. » Make sure the headphones’ battery is charged and they are powered on. » Stay within 3 ft. of the headphones when pairing to the transmitter base. » Stay within 50 ft. of the transmitter base. » Power the headphones OFF, then ON again. White noise/ Headphones will not function properly IAHRF79-2258-01-IB - 20Dec2018.indd 15 12/20/2018 1:37:27 PM... -
Page 16: Customer Support
CUSTOMER SUPPORT Contact Information Warranty Information Website: www.iLiveElectronics.com For Warranty Information and the most Email Support: prodinfo@dpiinc.com up-to-date version of this User’s Guide, Email Parts: partsinfo@dpiinc.com go to www.iLiveElectronics.com. Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique: www.iLiveElectronics.com Made Green Protect for Today Sustain for Tomorrow Copyright © 2019 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Need help?
Do you have a question about the IAHRF79B and is the answer not in the manual?
Questions and answers