Detaching The Stand Body (Using The Wall Mount); Mounting On A Table - LG E1951T Owner's Manual

Detaching the Stand Body (Using
the Wall mount)
1
Remove 2 screws and pull out the Hinge Cover
from the Monitor set.
2
Remove 4 screws and pull out the Stand Body
from the Monitor set.
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
DC-IN /
3
Press Power button on the front switch of panel
to turn the power on.
CAUTION
Disconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
10 cm
10 cm
10 cm
7