STAND INSTRUCTION
■
Image shown may differ from your TV.
32/37/42LG710H
INSTALLATION
Carefully place the TV screen side down on a
1
cushioned surface to protect the screen from
damage.
Assemble the STAND BODY to the COVER
2
BASE with the included screws.
3
Insert the stand as shown.
4
x 4
Tighten the stand with the
four screws (provided as parts
of the TV).
or
Tighten the two of these four screws
x 2
x 2
and the two Torx plus star head screws
(provided as parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a star head dri-
ver bit (not provided as parts of the TV).
!
NOTE
Make sure the screws in the stand are fully
G
G
tightened. (If not tightened fully, the product
could tilt forward and fall). But do not over
tighten, over-tightening can damage the threads
on the screws.
STAND BODY
COVER BASE
DETACHMENT
Carefully place the TV screen side down on a
1
cushioned surface to protect the screen from
damage.
Remove the four screws that hold the base on.
2
Detach the stand from TV.
3
PROTECTION COVER
After removing the stand, install the included
protection cover over the hole for the stand.
Press the PROTECTION COVER into the TV
until you hear it click.
15