GoVideo PVP4040 Pocket Cinema User Manual page 5

1 LCD Screen
Displays the player's status, menus, and media
files.
• Use the LCD ON/OFF switch to temporarily turn
off the LCD Screen to save battery life (see #16
below).
2 Charge indicator
Lights when the player's battery is charging. Turns
off when the battery is fully charged. To charge
the battery:
• Connect the supplied AC Adapter to the player's
DC In jack and plug it in.
OR
• Connect the player to a PC using the supplied
USB cable.
3 REC button
Starts recording from an external source
connected to the player's AV In jack.
4 REPEAT button
Selects one of the player's built-in repeat modes.
• You can also press and hold REPEAT to mark all
files for deletion. Then press STOP to delete all
marked files.
5 MENU button
Displays the player's Main menu.
6 VOLUME/SLIDE TIME -/+ buttons
Adjust the player's volume. Also use to set the
slide show interval from 2~30 seconds.
7 POWER/STOP button
Press to turn the player on. Press and hold to turn
the player off. Also use to stop playback.
8 SELECT control
The SELECT control has three positions (left, right,
and down) and a variety of uses:
• MENU NAVIGATION - Press left/right to browse
menu options. Press down to make selections.
• PLAY/PAUSE - Press down to play or pause the
selected file.
• SKIP PREV/NEXT - Press left/right during
playback to skip to the previous or next file.
• REWIND/FF - Press and hold left/right during
playback to scan backward or forward at
variable speeds.
• DELETE - Press and hold down to mark the
selected file for deletion. Then press STOP to
delete all marked files.
Overview
9 AV IN jack
Use to connect an external source (such as a DVD
player, VCR or camcorder), using the supplied
Audio/Video cable.
10 DC IN jack
Use to connect the supplied AC Adapter.
• The internal battery will charge whenever the
player is connected via the AC Adapter.
11 SD CARD slot
Use to insert an external SD memory card.
• SD (Secure Digital®) cards are high capacity
memory cards used to store video, audio, and
image files.
• To view the contents of your SD card, you must
switch the player from Internal to Extended
memory mode; see page 11.
12 Rechargeable Battery slot
Use to insert or remove the supplied lithium ion
battery.
• Pay attention to the correct polarities when
inserting the battery.
13 USB Connection jack
Use to connect the player to your PC to:
• Add media files to the player.
• Charge the battery.
14 NTSC/PAL switch
Selects your desired display system (NTSC or PAL).
• NTSC is the standard used in the United States.
15 HOLD switch
Temporarily locks all buttons on the player to
prevent accidental operation while walking,
jogging, etc.
16 LCD ON/OFF switch
Turns the LCD screen on and off. This is useful to
save battery life while listening to MP3 files.
17 Headphone jack
Use to connect the headphones/earphones.
18 60° TILT
Use to insert the loop on the supplied ring stand.
Allows the player to sit on a table at a comfortable
viewing angle.
19 30° TILT
Use to insert the loop on the supplied ring stand.
Provides an alternative viewing angle.
5 5