General Setup; Record Setup - GoVideo PVP4040 Pocket Cinema User Manual

GENERAL SETUP

GENERAL SETUP
MEMORY INTERNAL
LANGUAGE EXTENDED
POWER SAVE
RESET
UP GRADE

RECORD SETUP

RECORD
MPEG4 FINE
MP3 NORMAL
ECONOMY
MEMORY
Use to set the player to Internal or Extended (SD card) memory mode:
• INTERNAL: Use when playing, recording, deleting or formatting the
contents of the built-in memory. An SD card loaded in the player will
not be accessible.
• EXTENDED: Use when playing, recording, deleting or formatting
the contents of an SD card loaded in the player. The player's built-in
memory will not be accessible.
LANGUAGE
• Selects a language for the player's on-screen displays and menus.
POWER SAVE
• Conserves battery life by having the player turn off automatically if it
is left in Stop mode for five minutes.
RESET
• Restores all player settings to their factory defaults.
UPGRADE
Firmware upgrades may be available from time to time to add
functionality to the player. Check www.govideo.com for details.
1 Download the firmware upgrade file.
2 Connect the player to your PC with the supplied USB cable.
3 Copy the firmware upgrade file to the player.
4 Disconnect the player from the USB cable.
5 Select UPGRADE in the General Setup menu to upgrade the
firmware.
MPEG4
Use to set the picture quality for video recording.
• FINE: Best quality (~30 minutes* using the built-in memory)
• NORMAL: Good quality (~50 minutes* using the built-in memory)
• ECONOMY: Average quality (~110 minutes* using the built-in
memory)
* Recording time may vary depending on the video signal.
MP3
Use to set the sound quality for audio recording.
• SAMPLE RATE/BIT RATE: Sets the desired sample rate and bit rate
for MP3 recording (the higher the rate, the higher the sound quality
and file size).
• CHANNEL: Sets the player to record MONO (1 channel) or STEREO (2
channel) audio during recording.
Operation
11 11