LG M1950DM Owner's Manual page 68

HDMI (DTV) supported mode
Horizontal
Resolution
Frequency(kHz)
720 x 480 31.469
31.500
720 x 576 31.250
1280 x 720 37.500
1280 x 720 44.960
45.000
1920 x 1080 33.720
33.750
1920 x 1080 28.125
1920 x 1080 27.000
1920 x 1080 33.750
1920 x 1080 56.250
1920 x 1080 67.430
67.500
Component supported mode
Horizontal
Resolution
Frequency(kHz)
720 x 480 15.730
720 x 480 15.750
720 x 576 15.625
720 x 480 31.470
720 x 480 31.500
720 x 576 31.250
1280 x 720 44.960
1280 x 720 45.000
1280 x 720 37.500
1920 x 1080 33.720
1920 x 1080 33.750
1920 x 1080 28.125
1920 x 1080 56.250
1920 x 1080 67.432
1920 x 1080 67.500
Component port connecting informatio
Component ports on the
Monitor set
Video output ports
on DVD player
Vertical
Frequency(Hz)
59.940
60.000
50.000
50.000
59.940
60.000
59.940
60.000
50.000
24.000
30.000
50.000
59.940
60.000
Vertical
Frequency(Hz)
59.940
60.000
50.000
59.940
60.000
50.000
59.940
60.000
50.000
59.940
60.000
50.000
50.000
59.940
60.000
Y P P
B R
Y P P
B R
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
NOTE
y
Avoid keeping a fixed image on the set's
screen for prolonged periods of time. The
fixed image may become permanently
imprinted on the screen. Use a screen saver
when possible.
y
There may be interference relating to
resolution, vertical pattern, contrast or
brightness in PC mode. Change the PC
mode to another resolution or change the
refresh rate to another rate or adjust the
brightness and contrast on the menu until
the picture is clear. If the refresh rate of
the PC graphic card can not be changed,
change the PC graphic card or consult the
manufacturer of the PC graphic card.
y
The synchronization input waveform for
Horizontal and Vertical frequencies are
separate.
y
Connect the signal cable from the TVoutput
port of the PC to the RGB (PC) port of the
TV or the signal cable from the HDMI output
port of the PC to the HDMI/DVI IN port on
the TV.
y
Connect the audio cable from the PC to the
Audio input on the TV. (Audio cables are not
included with the TV).
y
If using a sound card, adjust PC sound as
required.
y
If the graphic card on the PC does
not output analogue and digital RGB
simultaneously, connect only one of either
RGB or HDMI/DVI IN to display the PC
output on the TV.
y
If the graphic card on the PC does output
analogue and digital RGB simultaneously, TV
the TV to either RGB or HDMI. (The other
mode is set to Plug and Play automatically
by the TV.)
y
DOS mode may not work depending on the
video card if you use an HDMI to DVI cable.
y
If you use too long an RGB-PC cable that is
too long, there may be interference on the
screen. We recommend using under 5 m of
cable. This provides the best picture quality.
67
SPECIFICATIONS