LG M1950DM Owner's Manual page 45

44
CUSTOMIZING SETTINGS
Setting
Screen
Customizes the PC display options in RGB mode.
(In RGB-PC
Option
Mode Only)
Resolution
Auto Configure
Position/Size/
Phase
Reset
Basic image options
Setting
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast Increases or decreases the gradient of the video signal. You may use
bright part of the picture is saturated.
Brightness Adjusts the base level of the signal in the picture. You may use
part of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all Colors.
Tint Adjusts the balance between red and green levels.
Advanced Control Customizes the advanced options.
Picture Reset Restores the options of each mode to the factory default.
NOTE
y
You cannot adjust Color and Tint in the RGB-PC / HDMI-PC mode.
y
When the Expert 1/2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness,
V Sharpness, Color or Tint .
Description
Selects a proper resolution. See "Customizing PC display options", p.26
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration
is in progress.
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Restores the options to the default setting.
Description
Brightness
Contrast when the
when the dark