PIONEER DJ DDJ-WEGO3 Manual page 2

Using WeDJ for Android
Before using WeDJ for Android
WeDJ for Android can be purchased from Google Play. Also check the
latest system requirements.
If you already have WeDJ for Android, update it to the latest version.
System requirements
Android version 4.4 or later
Cable A USB conversion cable (sold separately) is required.
An Internet connection is required to access Google
Internet connection
Play.
Others Your Android device must support the USB host mode.
For information on the latest system requirements, compatibility,
and supported operating systems, see [DDJ-WeGO3] of the [DJ
CONTROLLER] category from the [Software Info] page of the
Pioneer DJ support site below.
pioneerdj.com/en/support/software-information/
There is no guarantee that operation will be possible on all Android
devices.
The cable included with the Android device cannot be used.
Charging an Android device is not possible.
Depending on the power-saving settings and other conditions of the
Android device, performance may be insufficient.
Problems may occur with operation depending on the other software
that you use.
Connections
When the version of your Android device
is 5.0 or later
1 Connect speakers with a built-in amplifier, a power
amplifier, etc. to the [MASTER] output terminals of this
unit.
R L
Speakers with built-in amplifier,
power amplifier, etc.
2 Connect headphones to an [PHONES] output terminal
of this unit.
Connect stereo headphones with an impedance of 32
Headphones with an impedance less than 32
phones are not supported.
Do not connect headphones simultaneously to the stereo phone jack
and the stereo mini-phone jack.
2
En
3 Connect this unit and the USB conversion cable (sold
separately) with the included USB cable.
Select a USB conversion cable matching the shape of the USB terminal
of your Android device.
Be sure to connect directly using the USB cable included with this
product. A USB hub cannot be used.
The power cable included with the Android device cannot be con-
nected to the [USB-A] terminal of this unit.
Shape of terminal of
Android device
USB micro A terminal
USB micro B terminal
USB Type-C terminal
4 Connect the USB conversion cable to your Android
device.
or higher.
and mono head-
Headphones cord
To headphones
For checking
the output sound
Headphones
Shape of conversion cable connectors
USB micro A (male) to USB A (female)
USB micro B (male) to USB A (female)
USB Type-C (male) to USB A (female)
12V
DC IN
USB cable (included)
USB conversion cable
To USB port
WeDJ
Android device
5 V 2100 mA
USB iOS DEVICE