Table of Contents
Advertisement
You can enjoy stereo sound
when watching movies and TV
shows by connecting your
Dual-Deck VCR to your home
stereo system or stereo TV.
1
Connect VCR to Stereo
Connect RCA cables from the Left & Right
Audio Outputs on the back of the VCR to
the Auxiliary Inputs on your stereo receiver.
If you are using a stereo television, connect
the Video Output as well.
2
Set Playback Audio to Hi-Fi
Make sure that Deck 1 Hi-Fi and Deck 2
Hi-Fi are turned on in the Dual-Deck
Features menu; see page 50.
3
Set Stereo to Auxiliary Mode
Set your stereo receiver or television to
"Aux" or "Tape," whichever selects the line
input for your particular device.
4
Play a Tape
Insert a videotape in your VCR and adjust
the volume on your stereo receiver or
television. You should hear the audio
through your stereo speakers!
Audio Connections
To Stereo
Auxiliary
Inputs
DUAL-DECK FEATURES
1 : Remote Eject
On
2 : Playback Mode
Normal
And
3 : Auto Play / Rewind
Rew
4 : Panel Display
Auto
5 : Screen Display
On
On
6
Deck1 Hi-Fi
On
Off
7 : Deck2 Hi-Fi
On
____________________________________
/
= Move
= Sel
MENU=Quit
Hi-Fi
Deck
Power
Stop / Eject
Pause
Rewind
Play
F. Forward
Record
Deck Select
12 - ADVANCED CONNECTIONS
DUAL-DECK FEATURES
1 : Remote Eject
On
2 : Playback Mode
Normal
3 : Auto Play / Rewind
Rew
4 : Panel Display
Auto
5 : Screen Display
On
6 : Deck1 Hi-Fi
On
On
7
Deck2 Hi-Fi
On
Off
____________________________________
/
= Move
= Sel
MENU=Quit
Hi-Fi
Deck
Copy
Tape
99
Advertisement
Table of Contents
