Audio Setup; Digital Audio Output [Dvd] - GoVideo DP5040 User Manual

Audio Setup

Digital Audio Output [DVD]

The digital audio output jack (labeled "Coaxial") is
used to output the audio signal recorded on DVD
discs to an external amplifier/receiver. The player
provides three options for this audio signal:
• SPDIF/PCM - Select if you are using a 2-channel
digital amplifier.
• SPDIF/RAW - Select if you are using a Dolby
Digital 5.1 or DTS capable amplifier.
• Off - Select if you are not using the Coaxial audio
output.
1
Press Setup in Stop mode.
2
 
Press / to select "Audio Setup", then press
/Select.
3
 
Press / to select "Digital Out", then press
/Select.
Audio Setup
Digital Out
: Move
4
 
Press / to select your preferred Digital Out
setting.
5
Press /Select.
SPDIF/PCM
SPDIF/RAW
Off
: Select SETUP: Quit
WARNING:
• Do not set "Digital Out" to "SPDIF/RAW"
unless you are connecting the player to an
A/V amplifier/receiver with Dolby Digital (AC-3)
decoding capability.
• High volume sound may damage your hearing
as well as the speakers.
To return to the Setup menu

Press .
To exit the Setup menu
Press Setup or select "Exit Setup" on the Setup
Menu screen.
24