Table of Contents
Advertisement
DP Stream
Setting (*)
Quickstandby
Signage Settings Menu Contents
Set ID
OSD Orientation
Software upgrade
Serial number
Model name
Save model
information
Clone to USB
Clone from USB
Internal USB
operations
Video Wall Settings
Power Up Mode
Quick Standy
OPS Settings
OPS Information
OPS Status
Powerdown
Copy app cache from
USB
Scheduler Settings
Sets the DisplayPort stream type.
(*) This menu item appears only when the input source is set to DP.
If this feature is enabled, control of the product through serial communication port and Ethernet
port is possible. Enable if you wish to use the scheduler function.
Sets the device ID. You can select a value between 0-100 using the numeric buttons
on the remote in order to identify your Display.
Sets the OSD (On Screen Display) rotation of your Display. Landscape and Portrait
options are available.
Displays current software version. Press OK to see the Upgrade options menu. You
can use these options to start a manual search for software updates and set your
automatic scan preference.
Displays serial number of the unit. (Cannot be changed by user)
Displays model name of the unit. (Cannot be changed by user)
Copies the model information data of the unit to a connected USB device. This
information will be required if you contact Toshiba about your monitor
Copies the database files from the unit to a connected USB device.
Copies the database files from a connected USB device to the unit.
Copies files from internal USB to the unit.
Note: This feature may not be available depending on the model of your unit. Only available when internal
USB device is connected
Press OK to open the Video Wall Settings menu screen. Row Count, Column Count,
Cell and Offset options are available.
Configures the power up mode preference. Last state, Always on and Standby
options are available.
If this feature is enabled, control of the product through serial communication port and
Ethernet port is possible. Enable if you wish to use the scheduler function.
Press OK to open the OPS Settings menu screen. Three sub-menu options are available.
Displays read-only information about the OPS unit, if supported.
Displays whether the OPS module is on or off. Allows the change of status via soft
PSON signal (0.5s)
Turns the OPS off via hard PSON signal (5s)
Note: This menu will not be available if OPS is not supported or not connected to the unit.
Copies app cache data from a connected USB device to the unit.
Note: This feature may not be available depending on the model of your unit.
Press OK to open the Scheduler Settings menu screen. Set the Scheduler option
as On by using the Left/Right directional buttons. Using the sub-menu options you
can set the unit to turn on automatically at defined time with the defined input source
setting. It can also be set to turn off at defined time. If the Source option is set as Last
state, the input source will not be changed at the power-up. If the Source option is set
as USB, the media files in the connected USB device will be played back automatically
as explained in the section entitled 'USB Auto Play Feature'.
English - 15 -
MST and SST options are available.
Advertisement
Table of Contents
