Frequently Asked Questions And Troubleshooting; Frequently Asked Questions - Majestic MERCURY MERC32IL Series Owner's Manual

5 5

Frequently Asked Questions and Troubleshooting

A. Frequently Asked Questions
ISSUE
Condensation on the glass
Blue flames
Odor from fireplace
Film on the glass
Metallic noise
Is it normal to see the pilot flame burn
continually?
Power Outages
Battery backup (IPI Models)
Wall above appliance feels hot to
the touch.
Contact your dealer for additional information regarding operation and troubleshooting. Visit www.majesticproducts.com
to locate a dealer.
Majestic • MERC32IN, MERC32IL, MERC32VN, MERC32VL Owner's Manual • 2401-981 Rev. L • 9/20
18
This is a result of gas combustion and temperature variations. As the fireplace warms, this
condensation will disappear.
This is a result of normal operation and the flames will begin to yellow as the fireplace is al-
lowed to burn for 20 to 40 minutes.
When first operated, this fireplace may release an odor for the first several hours. This is caused
by the curing of the paint and the burning off of any oils remaining from manufacturing. Odor may
also be released from finishing materials and adhesives used around the fireplace.
This is a normal result of the curing process of the paint and logs. Glass should be cleaned
within 3 to 4 hours of initial burning to remove deposits left by oils from the manufacturing
process. A non-abrasive cleaner such as gas fireplace glass cleaner may be necessary. See
your dealer.
Noise is caused by metal expanding and contracting as it heats up and cools down, similar to
the sound produced by a furnace or heating duct. This noise does not affect the operation or
longevity of the fireplace.
In an intermittent pilot ignition system (IPI), the pilot flame should turn off when appliance is
turned off. Some optional control systems available with IPI models may allow pilot flame to
remain lit. In a standing pilot system the pilot will always stay on.
This appliance (IPI Models) can be operated on battery power in the event of a power out-
age. To access the battery pack, the decorative front, mesh and glass assembly must be
removed. Refer to Section 3 for more details.
No action necessary. This appliance ships with a non-combustible material attached. Speci-
fications of the attached non-combustible material are listed in the Installer's Manual for this
appliance.
SOLUTIONS