Ethernet Connector Signals - National Instruments VXIpc 870 Series User Manual

Appendix C Front Panel and Connectors
Ethernet
VXIpc 870 Series User Manual
Table C-2. SVGA Connector Signals (Continued)
Pin Signal Name
8 GND
9 NC
10 GND
11 NC
12 SD
13 HSync
14 VSync
15 SC
Figure C-7 shows the location and pinouts for the Ethernet connector
on the VXIpc 870 Series Table C-3 gives the name and description for the

Ethernet connector signals.

Amp manufactures a mating connector, part number 554739-1.
Figure C-7. Ethernet Connector Location and Pinout
Ground
Not Connected
Ground
Not Connected
Serial Data
Horizontal Sync
Vertical Sync
Serial Clock
C-8
Signal Description
1
Ethernet
8
.
www.ni.com