Table of Contents
Advertisement
Quick Links
824M
836M
848M
860M
872M
WARNING:
Improper installation,
adjustment, alteration, service or
maintenance can cause property
damage, injury or death.
installation, operating and maintenance
instructions thoroughly before installing
or servicing this equipment.
AVERTISSEMENT: L'installation inexacte, le réglage,
le changement, le service ou l'entretien peuvent
causer des dégats matériels, des dommages ou la
mort. Lisez les instructions d'installation, d'opération
et d'entretien complètement avant d'installer ou
entretenir ce matériel.
FOR YOUR SAFETY:
use gasoline or other flammable vapors or
liquids in the vicinity of this or any other
appliance.
POUR VOTRE SÛRETÉ: N'enregistrez pas ou
n'utilisez pas l'essence ou d'autres vapeurs ou
liquides inflammables à proximité de ceci ou d'aucun
autre appareil.
Star
Manufacturing
International Inc.
0 Sunnen Drive
St. Louis, MO 6343
Phone: (34) 678-6303
Fax: (34) 78-274
ULTRA-MAX™ GAS GRIDDLE MODELS
GRILS A GAZ ULTRA-MAX MODELES
824T
824TS
836T
836TS
848T
848TS
860T
860TS
872T
872TS
Read the
Do not store or
824TCHS
836TCHS
848TCHS
860TCHS
872TCHS
WARNING:
This appliance shall be
installed in accordance with current
regulations and used only in well-
ventilated space. Refer to instructions
before installing and using this
appliance.
AVERTISSEMENT: Cet appareil sera installé selon
des règlements actuels et utilisé seulement dans
l'espace bien-aéré. Référez-vous aux instructions
avant d'installer et utiliser cet appareil.
In addition, there should be posted, in a
prominent location, detailed instructions
to be followed in the event the operator
smells gas. Obtain the instructions from
the local gas supplier.
En outre, là devrait être signalé, dans un
emplacement en avant, des instructions détaillées
d'être suivi en cas que l'opérateur sent le gaz.
Obtenez les instructions du fournisseur local de gaz.
Installation and
Operating Instructions
Instructions d'installation
et d'opération
2M-Z4877 Rev. H 2/28/202
824TSCHS
836TSCHS
848TSCHS
860TSCHS
872TSCHS
Advertisement
Table of Contents
Related Manuals for Star Manufacturing International ULTRA-MAX 824M
Summary of Contents for Star Manufacturing International ULTRA-MAX 824M
- Page 1 Star Installation and Manufacturing Operating Instructions International Inc. Instructions d’installation 0 Sunnen Drive St. Louis, MO 6343 et d’opération Phone: (34) 678-6303 Fax: (34) 78-274 2M-Z4877 Rev. H 2/28/202 ULTRA-MAX™ GAS GRIDDLE MODELS GRILS A GAZ ULTRA-MAX MODELES 824M 824T 824TS 824TCHS 824TSCHS...
-
Page 2: Safety Symbol
SAFETY SYMBOL These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability. -
Page 3: Specifications
32 3/8” (82.3CM) 30 5/8” (77.8CM) 18” (45.8CM) 13 9/16” (34.4CM) 7 7/16” 4” (13.8CM) (10.1CM) GAS INLET IL2241 SPECIFICATIONS Dimensions Approx Weight Model Type Controls BTUH Griddle Area Width Depth Height Installed Shipping 214lbs 244lbs 824M Manual Valve (97kg) (110.6kg) 573 sq in 24"... - Page 4 GENERAL INSTALLATION DATA This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. CAUTION Before using your new equipment, read and understand all the instructions &...
-
Page 5: Leveling Unit
LEVELING UNIT This griddle is supplied with 4 feet or floor stand legs which must be screwed into the body. After the griddle is in its final position, adjust the legs to create 1/8 inch slant from back to front. This will allow the grease to run into the grease gutter and provide the proper combustion air for the burners. - Page 6 GAS PIPING Gas piping shall be of such size and so installed as to provide a supply of gas sufficient to meet the full gas input of the appliance. If the appliance is to be connected to existing piping, it shall be checked to determine if it has adequate capacity.
-
Page 7: Pilot Flame Adjustment
PILOT FLAME ADJUSTMENT The griddles are equipped with standing pilots and should be lit immediately after the gas is turned on. MANUAL VALVE AND THROTTLING CONTROL MODELS Adjust the flame as low as possible while still providing immediate burner ignition when the control knob is turned to high. -
Page 8: Burner Air Shutter Adjustment
BURNER AIR SHUTTER ADJUSTMENT The burner air shutter has a locking screw on the bottom side of the venturi. Loosen this screw to make any adjustment and tighten the screw to lock the air shutter in place after adjustment is complete. Any adjustment must be made when the burner is at full input before the control temperature setting has been satisfied. -
Page 9: Griddle Care (Chrome Surfaces)
GRIDDLE CARE (NON-CHROME SURFACES) It takes very little time and effort to keep the griddle attractive and performing at top efficiency. If grease is permitted to accumulate, it will form a gummy cake and then carbonize into a hard substance which is extremely difficult to remove. - Page 10 years against manufacturing defects to the original owner from the date of installation. This limited warranty is void if it is determined by Star Manufacturing International Incorporated or one of its authorized representatives that the chrome surface has been misused or abused or subjected to the following situations: 1. Improperly installed.
-
Page 11: Entretien Et Réparations
SYMBOLE DE SÉCURITÉ Ces symboles sont utilisés pour souligner à l’utilisateur les instructions d’utilisation ou d’entretien importantes contenues dans le manuel qui accompagne l’appareil. CONSERVEZ CE MANUEL POUR RÉFÉRENCE FUTURE AVIS L’utilisation de toute pièce autre que les pièces d’origine STAR dégage le fab- ricant de toute responsabilité. - Page 12 DONNÉES GÉNÉRALES D’INSTALLATION ATTENTION Ce matériel est conçu et vendu pour l’usage commercial seulement par le personnel qualifié et expérimenté en son exécution et n’est pas vendu pour l’usage du consommateur dans et autour de la maison ni pour l’usage directement par le grand public dans des emplacements de service de traiteur.
- Page 13 RASANT DE L'UNITÉ Cette plaque en fonte est fournie 4 pieds ou jambes ATTENTION d'éventaire d'étage qui doivent être vissées dans le N’INSTALLEZ PAS SANS ATTACHER ES corps. Après que la plaque en fonte est dans sa position finale, régler les jambes pour créer le point de vue de PIEDS OU DES JAMBES ET L'ETAGERE pouce 1/8 d'à...
- Page 14 TUYAUTERIE À GAZ La taille de la tuyauterie à gaz et la façon dont elle est installée doivent être telles qu’elle fournisse une alimentation suffisante de gaz pour répondre aux exigences d’admission de pleine puissance dans l’appareil. S’il faut raccorder l’appareil à la tuyauterie existante, il faut vérifier cette dernière pour déterminer si elle a la capacité...
- Page 15 ALLUMER DES INSTRUCTIONS Quand la gauffreuse est d’abord allumée, il fumera jusqu’à ce que les huiles et les impuretés de préservatif soient consommation. Les gauffreuses sont équipées des pilotes debout et devraient être allumées juste après que le gaz est allumé. LA COMMANDE MANUELLE DE VALVE ET D’CÉtranglement MODÈLE 1.
-
Page 16: Instructions De Fonctionnement
CONNEXION ÉLECTRIQUE POUR L’CAction INSTANTANÉE ET LES MODÈLES EXTÉRIEURS DE CHROME SEULEMENT Des grils extérieurs instantanés d’action et de chrome sont équipés d’une trois-fourche fondant la prise. L’unité est conçue pour l’usage sur 120 un circuit monophasé à C.A. de cycle de l’ampère 50/60 de volt 15 seulement. Pour la protection contre le choc électrique, l’unité... - Page 17 5 ans contre des défauts de fabrication au propriétaire initial de la date de l’installation. Cette garantie limitée est vide si elle est déterminée par Star Manufacturing International Incorporated ou un de ses représentants autorisés que la surface de chrome a été abusée ou maltraitée ou soumise aux situations suivantes: .
- Page 18 Visit our Website at: www.star-mfg.com Email: service@star-mfg.com THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit.
- Page 20 NAMEPLATE REFER TO THE PARTS LIST SPECIFIC TO YOUR MODEL FOR MORE DETAIL INFORMATION. Model: 800 SERIES STAR MANUFACTURING INTERNATIONAL, INC. SK1878 REV B 3-30-09...
-
Page 21: Parts List
PARTS LIST August 27, 202, Rev H Ultra-Max Gas Griddle Models: 824M, 824T, 824TS, 824TM, 824TCHS, 824TSCHS Fig. No Part No. Description Application G5-Z4812 FLUE 824M/T/TS/TSCHS G5-824004 824M G5-824005 GRIDDLE PLATE ASSY COMPLETE 824T/TS G5-824006 824TSCHS, 824TCHS G5-Z4793 BULB CLAMP 824T/TS/TSCHS G5-Z4794 BULB COVER... - Page 22 PARTS LIST August 27, 202, Rev H Ultra-Max Gas Griddle Models: 836M, 836T, 836TS, 836TCHS, 836TSCHS Fig. No Part No. Description Application G5-Z4813 FLUE 836M/T/TS/TSCHS G5-Z4817 FLUE DIVIDER 836M/T/TS/TSCHS G5-836004 836M G5-836005 GRIDDLE PLATE ASSY COMPLETE 836T/TS G5-836006 836TSCHS, 836TCHS G5-Z4793 BULB CLAMP 836T/TS/TSCHS...
- Page 23 PARTS LIST August 27, 202, Rev H Ultra-Max Gas Griddle Models: 848M, 848T, 848TS, 848TCHS, 848TSCHS Fig. No Part No. Description Application G5-Z4814 FLUE 848M/T/TS/TSCHS G5-Z4817 FLUE DIVIDER 848M/T/TS/TSCHS G5-848004 848M G5-848005 GRIDDLE PLATE ASSY COMPLETE 848T/TS G5-848006 848TSCHS, 848TCHS G5-Z4793 BULB CLAMP 848T/TS/TSCHS...
- Page 24 PARTS LIST August 27, 202, Rev H Ultra-Max Gas Griddle Models: 860M, 860T, 860TS, 860TCHS, 860TSCHS Fig. No Part No. Description Application G5-Z4815 FLUE 860M/T/TS/TSCHS G5-Z4817 FLUE DIVIDER 860M/T/TS/TSCHS G5-860004 860M G5-860005 GRIDDLE PLATE ASSY COMPLETE 860T/TS G5-860006 860TSCHS, 860TCHS G5-Z4793 BULB CLAMP 860T/TS/TSCHS...
- Page 25 PARTS LIST August 27, 202, Rev H Ultra-Max Gas Griddle Models: 872M, 872T, 872TS, 872TCHS, 872TSCHS Fig. No Part No. Description Application G5-Z4816 FLUE 872M/T/TS/TSCHS G5-Z4817 FLUE DIVIDER 872M/T/TS/TSCHS G5-872004 872M G5-872005 GRIDDLE PLATE ASSY COMPLETE 872T/TS G5-824006 872TSCHS, 872TCHS G5-Z4793 BULB CLAMP 872T/TS/TSCHS...
- Page 28 PARTS LIST October 24, 20, Rev H 800M and 800T Series MODEL Number Part Description Number Number Model Unit 2K-Z490 MANIFOLD 824M/T 2K-Z4902 MANIFOLD 836M/T 2K-Z4903 MANIFOLD 848M/T 2K-Z4904 MANIFOLD 860M/T 2K-Z490 MANIFOLD 872M/T 2K-Z492 BURNER FLEX TUBE 824M/T BURNER FLEX TUBE 836M/T BURNER FLEX TUBE 848M/T...
- Page 31 PARTS LIST October 24, 20, Rev H 824TS and 824TSCHS Series MODEL Number Part Description Number Model Number Unit 2K-Z492 824TS/TSCHS BURNER FLEX TUBE 2K-267 824TS/TSCHS FITTING 3/8 CC X 3/8 MPT 2P-43 824TS/TSCHS PIPE PLUG 2K-Y0 824TS/TSCHS NIPPLE 3/8 NPT X /2 2K-266 824TS/TSCHS ELBOW 3/8 NPT...
- Page 33 PARTS LIST October 24, 20, Rev H 836TS and 836TSCHS Series MODEL Number Part Number Number Description Model Unit 2K-Z492 836TS/TSCHS BURNER FLEX TUBE 2K-267 836TS/TSCHS FITTING 3/8 CC X 3/8 MPT 2P-43 836TS/TSCHS PIPE PLUG 2K-Y0 836TS/TSCHS NIPPLE 3/8 NPT X /2 2K-266 836TS/TSCHS ELBOW 3/8 NPT...
- Page 35 PARTS LIST October 24, 20, Rev H 848TS and 848TSCHS Series MODEL Number Part Description Model Number Number Unit 2K-Z492 848TS/TSCHS BURNER FLEX TUBE 2K-267 848TS/TSCHS FITTING 3/8 CC X 3/8 MPT 2P-43 848TS/TSCHS PIPE PLUG 2K-Y0 848TS/TSCHS NIPPLE 3/8 NPT X /2 2K-266 848TS/TSCHS ELBOW 3/8 NPT...
- Page 37 PARTS LIST October 24, 20, Rev H 860TS and 860TSCHS Series MODEL Part Model Number Description Number Number Per Unit 2K-Z492 860TS/TSCHS BURNER FLEX TUBE 2K-267 860TS/TSCHS FITTING 3/8 CC X 3/8 MPT 2P-43 860TS/TSCHS PIPE PLUG 2K-Y0 860TS/TSCHS NIPPLE 3/8 NPT X /2 2K-266 860TS/TSCHS ELBOW 3/8 NPT...
- Page 39 PARTS LIST October 24, 20, Rev H 872TS and 872TSCHS Series MODEL Part Model Number Description Number Number Per Unit 2K-Z492 872TS/TSCHS BURNER FLEX TUBE 2K-267 872TS/TSCHS FITTING 3/8 CC X 3/8 MPT 2P-43 872TS/TSCHS PIPE PLUG 2K-Y0 872TS/TSCHS NIPPLE 3/8 NPT X /2 2K-266 872TS/TSCHS ELBOW 3/8 NPT...
- Page 40 STAR INTERNATIONAL HOLDINGS INC. COMPANY Star - Holman - Lang - Wells - Bloomfield - Toastmaster 10 Sunnen Drive, St. Louis, MO 63143 U.S.A. (314) 678-6303 www.star-mfg.com...
Need help?
Do you have a question about the ULTRA-MAX 824M and is the answer not in the manual?
Questions and answers