Advertisement
Quick Links
ULTRA-MAX GAS GRIDDLE
824M-LP
836M-LP
848M-LP
860M-LP
872M-LP
WARNING:
Improper installation,
adjustment, alteration, service or
maintenance can cause property damage,
injury or death.
operating and maintenance instructions
thoroughly before installing or servicing
this equipment.
FOR YOUR SAFETY: Do not store or use
gasoline or other fl ammable vapors or
liquids in the vicinity of this or any other
appliance.
Star
Manufacturing
International Inc.
10 Sunnen Drive
St. Louis, MO 63143
Phone: (314) 781-2777
Fax: (314) 781-2714
MODELS
824T-LP
836T-LP
848T-LP
860T-LP
872T-LP
Read the installation,
824TS-LP
836TS-LP
848TS-LP
860TS-LP
872TS-LP
WARNING: This appliance shall be installed
in accordance with current regulations and
used only in well-ventilated space. Refer
to instructions before installing and using
this appliance.
In addition, there should be posted, in a
prominent location, detailed instructions
to be followed in the event the operator
smells gas. Obtain the instructions from
the local gas supplier.
1
Installation
and
Operating
Instructions
2M-Z7924 Rev. A 3/15/2006
824TSCHS-LP
836TSCHS-LP
848TSCHS-LP
860TSCHS-LP
872TSCHS-LP
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Star Manufacturing International ULTRA-MAX 824M-LP
Summary of Contents for Star Manufacturing International ULTRA-MAX 824M-LP
- Page 1 Star Manufacturing Installation International Inc. Operating 10 Sunnen Drive Instructions St. Louis, MO 63143 Phone: (314) 781-2777 Fax: (314) 781-2714 2M-Z7924 Rev. A 3/15/2006 ULTRA-MAX GAS GRIDDLE MODELS 824M-LP 824T-LP 824TS-LP 824TSCHS-LP 836M-LP 836T-LP 836TS-LP 836TSCHS-LP 848M-LP 848T-LP 848TS-LP 848TSCHS-LP 860M-LP 860T-LP 860TS-LP...
-
Page 2: Safety Symbol
8:00 am to 4:30 p.m. Central Standard Time Hours: Telephone: (800) 807-9054 Local (314) 781-2777 Fax: (800) 396-2677 Local (314) 781-2714 E-mail Parts@star-mfg.com Service@star-mfg.com Warranty@star-mfg.com Website: www.star-mfg.com Mailing Address: Star Manufacturing International Inc. 10 Sunnen Drive St. Louis, MO 63143 U.S.A... -
Page 3: Specifications
SPECIFICATIONS 824M-LP Type: Manual Valve 2 Controls, 60,000 BTUH, 573 sq. in. (3697 sq. cm) Grid Area Approximate Weight: Installed - 214 Lb s (97.0 kg), shipping - 244 Lbs (110.6 kg) Dimensions: 24" - Width, 32 3/8" - Depth, 18" - Height (61 cm - Width, 82.2 cm - Depth, 45.7 cm - Height) 836M-LP Type: Manual Valve... - Page 4 860T-LP Type: Throttling Control 5 Controls, 150,000 BTUH, 1433 sq. in. (9242 sq. cm) Grid Area Approximate Weight: Installed - 550 Lbs (249.2 kg), shipping - 615 Lbs (278.7 kg) Dimensions: 60" - Width, 32 3/8" - Depth, 18" - Height (152.4 cm - Width, 82.2 cm - Depth, 45.7 cm - Height 872T-LP Type: Throttling Control...
- Page 5 836TSCHS-LP Type: Snap Action Control With Safety Pilot and Chrome Plate 3 Controls, 90,000 BTUH, 860 sq. in. (5545 sq. cm) Grid Area Approximate Weight: Installed - 333 Lbs (150.9 kg), shipping - 375 Lbs (169.9 kg) Dimensions: 36" - Width, 32 3/8" - Depth, 18" - Height (91.4 cm - Width, 82.2 cm - Depth, 45.7 cm - Height) 848TSCHS-LP Type: Snap Action Control With Safety Pilot and Chrome Plate...
-
Page 6: General Installation Data
GENERAL INSTALLATION DATA NOTICE CAUTION When this appliance is installed with casters, it must be installed with the casters supplied, a connector This equipment is designed and sold for commercial complying with either ANSI Z21.69 or CAN/CGA-6.16 use only by personnel trained and experienced in its and a quick-disconnect device complying with either operation and is not sold for consumer use in and ANSI Z21.41 or CAN1-6.9. -
Page 7: Leveling Unit
LEVELING UNIT CAUTION This griddle is supplied with 4 feet or fl oor stand legs which must be screwed into the body. Unit DO NOT INSTALL WITHOUT ATTACHING FEET must be level. Level unit by adjusting the (4) feet OR SUPPLIED STAND LEGS AND SHELF - DO which have an adjustment of 1-3/4"... - Page 8 GAS PIPING CHECKING FOR GAS LEAKS Gas piping shall be of such size and so installed as Check entire piping system for leaks. Soap and to provide a supply of gas suffi cient to meet the full water solution or other material acceptable for the gas input of the appliance.
- Page 9 PILOT FLAME ADJUSTMENT ELECTRICAL CONNECTION FOR SNAP The griddles are equipped with standing pilots and ACTION AND CHROME SURFACE MODELS should be lit immediately after the gas is turned on. ONLY Snap action and chrome surface griddles are equipped with a three-prong grounding plug. The unit is MANUAL VALVE AND THROTTLING designed for use on a 120 volt 15 amp 50/60 cycle...
- Page 10 GRIDDLE CARE (NON-CHROME CAUTION SURFACES) It takes very little time and effort to keep the griddle 1. Never use pumice, griddle stones, or abrasives attractive and performing at top effi ciency. If grease on the surface. is permitted to accumulate, it will form a gummy cake 2.
- Page 11 CHROME GRIDDLE SURFACE LIMITED WARRANTY EXCLUSIONS Your chrome griddle has been designed to give you many years of cooking reliability and requires minimum maintenance to keep the chrome surface in its original condition. All chrome griddle surfaces are warranted for a period of 5 years against manufacturing defects to the original owner from the date of installation.
- Page 12 Visit our Website at: www.star-mfg.com Email: service@star-mfg.com THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same.
-
Page 14: Parts List
ALL TS/TSCHS 2C-Z8547 BOLT, KNOB STOP IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc. - Page 15 REGULATOR (4” AND 10”) ALL TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 16 REGULATOR (4” AND 10”) ALL TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 17 REGULATOR (4” AND 10”) ALL TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 18 REGULATOR (4” AND 10”) ALL TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 21 FITTING 3/8 CC X 1/4 MPT 872T IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 27 2K-Z4611 ELBOW 3/4 NPT 824TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 28 836TS/TSCHS N2-30409 CORD SET 836TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 29 848TS/TSCHS N2-30409 CORD SET 848TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 30 NIPPLE 3/4 NPT X 22 1/2 860TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 31 NIPPLE 3/4 NPT X 22 1/2 872TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
Need help?
Do you have a question about the ULTRA-MAX 824M-LP and is the answer not in the manual?
Questions and answers