Installing an M.2 module
► LIFEBOOK U757: If applicable, insert the M.2 adapter into the compartment.
► Insert the M.2 module at a slight angle in the direction of the arrow (1)
into the slot on the mainboard.
► Fasten the M.2 module in place in the slot with the screw (2).
Removing an M.2 module
► Undo the screw (1).
The M.2 module snaps slightly upwards.
► Pull the M.2 module in the direction of the arrow (2) and out of the slot on
the mainboard and remove it from the casing.
► LIFEBOOK U757: If you want to install a HDD instead of a new M.2 module, remove the
M.2 adapter (located beneath the M.2 module) from the compartment and install the HDD,
see
"Removing and installing hard disk (HDD, LIFEBOOK U757 only)", Page
Fujitsu
Removing and installing components during servicing
2
1
1
2
75.
73