Connecting An External Monitor - Fujitsu LIFEBOOK U757 Operating Manual

Connecting external devices

Connecting an external monitor

An analogue monitor is connected to the analogue VGA monitor port, a digital
monitor to the Displayport or the DVI-D monitor port on the optional Port Replicator.
Screen output is limited to a maximum of two screens at any one time (see
combinations", Page
Monitorport Monitorport VGAconnection socket Monitor
Digital Displayport (on notebook or on optional
Port Replicator)
Digital DVI-D monitor port (on the optional Port
Replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
If you wish to operate the monitor via a DVI port, use the optional Port
Replicator available for your notebook.
62
32, section "Toggle output screen").
"Key combinations", Page
Analogue VGA monitor port (on notebook or on
optional port replicator)
32.
"Key
Fujitsu