Using The Vaio Control Center - Sony VAIO VPCX Series Operating Instructions Manual

Customizing Your VAIO Computer >

Using the VAIO Control Center

!
For information on virtualization and how to use hardware virtualization software, contact the software publisher.
Intel VT may not be available depending on the CPU installed on your computer.
To enable Intel VT
1 Turn on your computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Press the < or , key to select Advanced.
Press the M or m key to select Intel(R) Virtualization Technology or Intel(R) VT, press the Enter key, select Enabled,
4
and press the Enter key.
!
If the Advanced tab is not displayed in the BIOS setup window or you cannot select Intel(R) Virtualization Technology, Intel VT is not available on the
computer.
5 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Using the VAIO Control Center
The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior.
To use the VAIO Control Center
1 Click Start, All Programs, and VAIO Control Center.
2 Select your desired control item and change the settings.
n 83 N