GoPro HD HERO2 User Manual page 20

caMera asseMbly
Your HD HERO2 housing comes with two types of backdoors—waterproof and
skeleton. To swap out a backdoor, click the door off its hinge. To attach the other
backdoor, click it back on the hinge.
skeleton Backdoor
The Skeleton backdoor (non-waterproof)
provides better sound quality by allowing
more sound to reach the camera's
microphone. It also reduces wind noise
at speeds up to 100mph when mounted
on helmets, motorcycles, bike and other
fast-moving vehicles. Use this backdoor
only when water damage is not a risk.
This backdoor is also recommended for
use inside vehicles.
Apply RAIN-X or a similar anti-beading solution to the housing
pRo lens to prevent water-spots from forming when using your
tip: camera in rain or water. When RAIN-X is not available,
periodically licking your lens is a good backup solution.
38
Waterproof Backdoor
The waterproof backdoor makes
the housing waterproof to 197
feet / 60 meters. Use this door
when you need to protect the
camera from water and other
environmental hazards.
sWApping Housing DooRs
Your HD HERO2 housing comes with two types of backdoors—waterproof
and skeleton.
to swap out a backdoor:
1. Open the backdoor of the housing so that it is hanging downwards.
2. Pull downwards on the backdoor until it snaps free from the hinge.
3. Line up replacement backdoor into the hinge opening.
4. Push upwards on the backdoor until it clicks into place.
caMera asseMbly
39