Waiting Call; Call Transfer - Maxcom COMFORT MM715 SOS User Manual

This function makes it possible to hide your own number
during the call.
Select „Establish network", „Hide the number" or „Show
the number" and press „Ok".

13.2.2 Waiting call

This is the network service. If an operator offers this
service, it is required to perform relevant configuration. On
entering MENU->Settings->Call settings->Waiting call you
can check the state of availability readiness and select
whether you want to activate this function.
If the function of waiting for a call is activated, and the user
carries on a conversation, each next incoming call will be
signaled by emitted signal of the second call.
It is possible to answer the second call and hang up the
first one

13.2.3 Call transfer

The user can set the function of transferring incoming
calls directly to the voice mail or to other selected number.
1. To set the function of Call transfer enter: MENU-
>Settings->Call settings->Call transfer.
2. Then select when you want to transfer the calls from
available list: 1 Transfer all voice calls Transferring all
incoming calls to selected number), 2 Transfer when
unavailable (Transferring calls when your phone is
switched off or when you are out of range ), 3 Transfer
when there is no answer (Transferring calls when you
do not answer the phone), 4 Transfer when busy
57