Gigabyte GA-B250-HD3P User Manual page 7

Storage Interface Chipset:
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and
PCIe x4/x2 SSD support)
- 1 x SATA Express connector
* The SATA Express connector is not compatible with regular SATA devices.
- 6 x SATA 6Gb/s connectors
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA
USB Chipset+ASMedia
Š
- 1 x USB Type-C
- 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel
Chipset:
Š
- 6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through
the internal USB headers)
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
Internal 1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Connectors Š
1 x M.2 Socket 3 connector
Š
1 x SATA Express connector
Š
6 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
3 x system fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
1 x USB 3.1 Gen 1 header
Š
2 x USB 2.0/1.1 headers
Š
1 x Trusted Platform Module (TPM) header
Š
1 x serial port header
Š
1 x parallel port header
Š
1 x Clear CMOS jumper
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
1 x D-Sub port
Connectors
Š
1 x DVI-D port
Š
1 x HDMI port
Š
1 x USB Type-C
Š
1 x USB 3.1 Gen 2 Type-A port (red)
Š
4 x USB 3.1 Gen 1 ports
Š
2 x USB 1.1 ports
Š
1 x RJ-45 port
Š
6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker
Š
Out, Line In, Line Out, Mic In)
I/O Controller iTE I/O Controller Chip
Š ®
Hardware Voltage detection
Š
Temperature detection
Monitor
Š
Fan speed detection
Š
Overheating warning
Š
connectors.
USB 3.1 Gen 2 Controller:
®
port on the back panel, with USB 3.1 Gen 2 support
™
port, with USB 3.1 Gen 2 support
™
- 7 -