Gigabyte GA-B250-HD3P User Manual page 14

_
B
S B_
B
5) SATA EXPRESS (SATA Express Connector)
Each SATA Express connector supports a single SATA Express device. The SATA Express connector is
not compatible with regular SATA devices.
_ S
S_
_
B
_ U
_
B
6) SATA3 0/1/2/3/4/5 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
F_USB3 F
1.5Gb/s standard. Each SATA connector supports a single SATA device.
7) M2S_32G (M.2 Socket 3 Connector)
The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs.
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Use a screw driver to unfasten the screw and nut from the motherboard. Locate the proper mounting hole
for the M.2 SSD to be installed and then screw the nut first.
Step 2:
Slide the M.2 SSD into the connector at an angle.
Step 3:
Press the M.2 SSD down and then secure it with the screw.
B S_
B
S _
U
B_
SATA3 5 3 1
4 2 0
7
7
To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Peripherals\SATA
And RST Configuration," for more information.
110 80 60
Select the proper hole for the M.2 SSD to be installed and refasten the screw and nut.
F
_ 0
1
1
_ F
_ 0 F
42
- 14 -
_
S
S
B_
Pin No. Definition
USB 0_ B
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND