Advertisement
Quick Links
Advertisement
Related Manuals for RODE Microphones NT1-AI-1
Summary of Contents for RODE Microphones NT1-AI-1
- Page 1 US E R G UI D E...
-
Page 2: System Requirements
OVERVIEW The AI-1 USB Audio Interface adds studio-quality Input and Output capabilities to your PC or Mac, turning your recording software into a full recording setup. With its high quality Neutrik XLR-1/4” Combo Jack combined input and discrete Class-A preamp, the AI-1 allows you to connect a microphone or instrument or line level audio signal to your Mac/Windows computer for recording. -
Page 3: Tips For Best Results
CONNECTING YOUR AI-1 If your computer doesn’t automatically switch its default input/output to the RODE AI-1 when connected, you can set this up with the following steps: Mac OS Go to System Preferences > Sound Confirm that ‘RODE AI-1’ is selected as the input and output device. -
Page 4: Hardware Features
HARDWARE FEATURES Front XLR-1/4” Combo Input Balanced input via 3-pin XLR- 1/4” Neutrik combo socket. Microphones, instruments (guitars) and line level instruments (synthesizers) can be connected via this input. Signal LED Indicates signal input level. No LED indicates below -60dB. Green LED indicates an input level of at least -40dB, Yellow indicates an input level above -12dB FRONT and Red indicates an input level of above -3dB. -
Page 5: Specifications
SPECIFICATIONS Computer Connectivity Form Factor Desktop Simultaneous I/O 1 x 2 Number of Preamps Phantom Power Bit Depth 24-bit Sample Rates 44.1 kHz 48 kHz 88.2 kHz 96 kHz Analog Inputs 1 x Neutrik XLR-1/4” combo Analog Outputs 2 x 1/4” (impedance balanced) 1 x 1/4”... - Page 6 ADVANCED SPECIFICATIONS INPUT OUTPUTS MONITOR OUTPUTS XLR/MIC INPUT Maximum Output Level -6dBu Dynamic Range 104dBA Frequency Response 20Hz – 20kHz better than Equivalent Input Noise @ –128dBA ±1dB Maximum Gain Dynamic Range 112dBA (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted) HEADPHONE Max Input +6dBu Max output power at...