RODE Microphones Caster Pro II Quick Start Manual

CONNECTIONS
Connect your RØDECaster PRO II as follows:

Plug the included USB-C power adaptor into the power connector (1)

Use the included USB-C cable to connect USB1 (2) to your computer

A microSD card can be inserted into the socket (3) if required.

The unit can be connected to an ethernet network using the CAT5 (4) socket if required.

Additional UISB devices (eg USB storage devices, mobile phoens etc) can be connected to the
USB2 connector (5). Additional cables (eg RØDE SC15 or 16) may be required

Headphones should be connected to the headphone outputs (6). Up to 4 pairs of headphones
can be connected.

Monitor speakers can be connected to the Line Out (7) if required.

Microphones and / or musical instruments are connected to the XLR Combi inputs (8).
POWERING THE UNIT ON AND OFF
To turn the unit on, press the red power button on the left of the back panel.
To turn the unit off, press this button again, and then follow the prompts on the screen of the unit.
QUICK START GUIDE