Page 2
MacOS 10.10 or later with USB 2.0 or 3.0 USB port Windows Windows 7 OS or later with USB 2.0 or 3.0 USB port The AI-1 is USB bus powered so there is no need for an external power supply. Some laptops may limit the USB output power when running on battery.
Page 3
(alternatively right click the speaker icon in the bottom right of the taskbar and select Playback) Confirm that ‘RODE AI-1’ is selected as the default device in both the Playback and Recording tabs. The AI-1 is a class compliant device and therefore does not need any drivers installed.
When Direct Monitoring is OFF, you will hear only audio from the computer. USB LED Indicates when the AI-1 is connected via the USB cable. Headphone Jack Output Connector for headphones, ¼’’ TRS jack required.
SPECIFICATIONS Computer Connectivity Form Factor Desktop Simultaneous I/O 1 x 2 Number of Preamps Phantom Power Bit Depth 24-bit Sample Rates 44.1 kHz 48 kHz 88.2 kHz 96 kHz Analog Inputs 1 x Neutrik XLR-1/4” combo Analog Outputs 2 x 1/4” (impedance balanced) 1 x 1/4”...
Page 6
ADVANCED SPECIFICATIONS INPUT OUTPUTS MONITOR OUTPUTS XLR/MIC INPUT Maximum Output Level -6dBu Dynamic Range 104dBA Frequency Response 20Hz – 20kHz better than Equivalent Input Noise @ –128dBA ±1dB Maximum Gain Dynamic Range 112dBA (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted) HEADPHONE Max Input +6dBu Max output power at...