Functional Description - Makita XBU02 Instruction Manual

may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with
any conductive material.
(2) Avoid storing battery cartridge
in a container with other metal
objects such as nails, coins, etc.
(3) Do not expose battery cartridge
to water or rain.
A battery short can cause a large
current flow, overheating, possible
burns and even a breakdown.
6. Do not store the tool and battery
cartridge in locations where the
temperature may reach or exceed
50 ﾟ C (122 ﾟ F).
7. Do not incinerate
cartridge even if it is severely
damaged or is completely worn out.
The battery cartridge can explode
in a fire.
8. Be careful not to drop or strike
battery.
9. Do not use a damaged battery.
10. Follow your
relating to disposal of battery.
SAVE THESE
INSTRUCTIONS.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before
completely discharged.
Always stop tool operation and
charge the battery cartridge when
you notice less tool power.
2. Never recharge a fully charged
battery cartridge.
Overcharging shortens the battery
service life.
3. Charge the battery cartridge with
room temperature at 10 ﾟ C - 40 ﾟ C
(50 ﾟ F - 104 ﾟ F). Let a hot battery
cartridge
charging it.
4. Charge the battery cartridge once
in every six months if you do not
use it for a long period of time.
the
local regulations
cool down
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is switched off
•
and the battery cartridge is removed before
adjusting or checking function on the tool.
Installing or removing battery
cartridge
3
battery
015475
CAUTION:
Always switch off the tool before
•
installing or removing of the battery
cartridge.
Hold the tool and the battery cartridge
•
firmly when installing or removing
battery cartridge. Failure to hold the tool
and the battery cartridge firmly may cause
them to slip off your hands and result in
damage to the tool and battery cartridge
and a personal injury.
To remove the battery cartridge, slide it
from the tool while sliding the button on the
front of the cartridge.
To install the battery cartridge, align the tongue
on the battery cartridge with the groove in the
housing and slip it into place. Insert it all the
way until it locks in place with a little click. If
you can see the red indicator on the upper side
of the button, it is not locked completely.
CAUTION:
Always install the battery cartridge fully until
•
the red indicator cannot be seen. If not, it
may accidentally fall out of the tool, causing
before
injury to you or someone around you.
Do not install the battery cartridge forcibly.
•
If the cartridge does not slide in easily, it is
not being inserted correctly.
4
2
2
1
3
1. Red indicator
2. Button
3. Battery cartridge