Makita XCV17 Instruction Manual page 16

1. Shoulder the vacuum cleaner body and fas-
ten upper and lower belts. Adjust the tightness as
necessary.
2.
Press button to start vacuuming. If you want
to change the suction power, press
desired suction power is selected. Press
stop.
During the operation, hook the switch box on the ring
or the lower belt. The hook can be slanted for lighting
forward when hooked on the lower belt.
► 1. Ring 2. Lower belt
button until the
button to
1
2
3. Replace the filter bag when it becomes full. Open
the lid and take out the filter bag. Pull the strip on the
side of the opening to shut the filter bag and dispose of
the filter bag in whole.
► 1. Strip
When using a dust bag, take out the dust bag and dis-
pose of the dust by releasing the latch.
1
► 1. Latch
NOTICE:
Do not put filter bag/dust bag or other
heavy objects on the lid. The appliance may fall
down.
NOTICE:
Periodically check the filter bag if it is
full. Continuous use with the filter bag full results in
reduced suction power.
NOTICE:
Do not use an used filter bag. The filter
bag is designed for single use. Using filter bag repeat-
edly may cause clogging of the filter and results in
damage to the cleaner. If you want to use the bag
repeatedly, use a dust bag.
16 ENGLISH
1