Gigabyte GA-SINXP1394 User Manual page 52

DRAM Clock (MHz)
8Please set DRAM Clock according to y our requirement.
If y ou use DDR266 DRAM module, please set "DRAM Clock(MHz)" to Auto or 266. If y ou use
DDR333 DRAM module, please set "DRAM Clock(MHz)" to Auto or 333.
Incorrect using it may cause y our sy stem broken. For pow er End-User use only !
AGP/PCI Clock Control
8AUTO
8Manual
AGP Clock (MHz)
8Please set AGP Clock according to y our requirement.
Incorrect using it may cause y our sy stem broken. For pow er End-User use only !
PCI Clock (MHz)
8Please set PCI Clock according to y our requirement.
Incorrect using it may cause y our sy stem broken. For pow er End-User use only !
AGP Voltag e Control
8Normal
8+0.1V
DRAM Voltage Control
8Normal
8+0.1V
CPU Voltag e Control
8 Supports adjustable CPU Vcore from 1.550V to 1.750V by 0.025V step.
(Default v alue: Normal)
GA-SINXP1394 Motherboard
Set AGP/PCI Clock Control to AUTO. (Default v alue)
Set AGP/PCI Clock Control to Manual.
Set AGP Voltage Control to Normal. (Default v alue)
Set AGP Voltage Control to +0.1V.
Set DRAM Voltage Control to Normal. (Default v alue)
Set DRAM Voltage Control to +0.1V.
- 48 -