Other Problems - Yamaha YVC-200W User Manual

Symptom Cause
The sound breaks up The speaker volume is high.
or is loud
The microphone sensitivity on the other
caller is high.
The sound at the The microphone sensitivity on the
other caller breaks computer connected via USB is low.
up or is loud
The speaker volume on the other caller is
high.
Echoes or howling There is a problem with the device structure
can be heard or usage environment at the other caller.
Echoes or howling The computer connected via USB has not
can be heard at the correctly recognized this product.
other caller
A speaker and microphone other than the
YVC-200 is selected in the communication
app on the computer connected via USB.
Noise can be heard There is a problem with the device structure
or usage environment at the other caller.
Noise can be heard There is a device nearby that is generating
at the other caller noise.

6.4. Other Problems

Symptom Cause
The power turns off The automatic power off function activates. Turn on the power again.
during use
The battery level is low.
The microphone A fault was detected in the software or
indicator flashes red hardware.
during startup
The battery indicator The device has not been used for a long
is flashing and the time and will take a long time to charge.
product will not start.
Solution
Decrease the speaker volume.
(→Adjusting the Speaker
Decrease the microphone sensitivity on the
other caller.
Decrease the microphone sensitivity.
(→Adjusting the Microphone
Decrease the speaker volume on the other
caller.
Review the device configuration and usage
environment at the other caller.
Check the computer settings.
(→Connecting a Computer via
Select the YVC-200 in the speaker device
settings and microphone device settings of
the communication app.
Review the device configuration and usage
environment at the other caller.
Move as far away from the noise source as
possible.
Solution
(→Turning the Power On and
Perform charging.
(→Charging)
Ask the store where you purchased this
product for repair.
Continue charging until starting is complete
(approx. 10 minutes).
6.4. Other Problems | 21
6. Troubleshooting
Volume)
Sensitivity)
USB)
Off)