Table of Contents
Advertisement
2. Pair the product with the smartphone.
Enable Bluetooth on the smartphone you are connecting and pair with the "YVC-200 Yamaha". When
required to enter a passkey, enter the numerals "0000".
Note
• Check on the smartphone that pairing is complete, and if it did not succeed, perform the pairing
again.
• Normally, connection occurs at the same time as pairing.
• In the pairing wait state, if you press the Bluetooth button (
pairing completion, the pairing wait state ends.
3.4.2. Connecting
This section describes how to connect to a paired smartphone via Bluetooth.
1. Perform any of the following operations.
a. Press the Bluetooth button (
If there are multiple paired smartphones, the smartphone that was connected to this product last is
connected.
b. Perform the Bluetooth connection operation in the smartphone.
2. A notification sound plays and the Bluetooth indicator lights up when complete.
3.4.3. Pairing/Connecting via NFC
For smartphones that run Android and support NFC, Bluetooth pairing and connection can be made at the same
time by using the NFC function.
) on this product.
) or if 90 seconds passes without
3.4. Connecting a Smartphone via Bluetooth | 9
3. Preparation
Advertisement
Table of Contents
