Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bartscher W2000 E
Summary of Contents for Bartscher W2000 E
- Page 1 W2000 E 825215 Original-Gebrauchsanleitung V3/0818...
-
Page 2: Table Of Contents
4.2 Overview of parts ....................29 5. Installation and operation ..................30 5.1 Installation ......................30 5.2 Operation ......................33 6. Cleaning ........................35 7. Waste disposal ......................36 Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120 33154 Salzkotten... -
Page 3: Safety
Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. -
Page 4: Safety Instructions
HOT SURFACE! This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation. - Page 5 The device must be operated in correct and safe technical • condition only. In case of operational problems disconnect the device from the power supply (pull the plug from the socket) and contact the service company. Prevent access of children to the package materials like plastic •...
- Page 6 Do not cover the cable. Keep away the cable from operating • range. Check the power cord regularly for damage. Do not use the • appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers.
- Page 7 HOT SURFACE! Burn hazard! To avoid the hazard results please follow the safety instructions below. During the operation, the housing and protective grid become • very hot, do not touch these elements during the operation of the device. Also after switching the device off, it remains hot for some •...
-
Page 8: Proper Use
In case of fire, before starting any fire-fighting actions, pull the • plug from the socket. Ensure proper flow of fresh air. Note: Never extinguish fire with water while the plug is connected to the socket. Risk of electric shock! 1.3 Proper use The operational safety of the device is assured only in case of proper use, according to the operation manual. -
Page 9: General Information
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors. -
Page 10: Transport, Packaging And Storage
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. -
Page 11: Technical Data
4. Technical data 4.1 Technical specification Heater W2000 E Name for wall mounting 825215 Code-No: Housing material: Aluminum infrared heating tube 2000 W for indoor and outdoor use wall holder for easy mounting, inclination angle up to 90° Design: main switch, ON/OFF button cable outlet at the rear of the heater cable length: 1.7 meters... -
Page 12: Overview Of Parts
4.2 Overview of parts Protective fins Wall holder Housing Main switch Control panel Ventilation holes Infrared heating tube - 29 -... -
Page 13: Installation And Operation
5. Installation and operation 5.1 Installation Unpack the device and remove the packaging material. Check the delivery for • completeness. CAUTION! Never remove the nameplate and warning signs from the device. Place of installation The heater may be mounted outdoors or in a big, open and well ventilated room. •... - Page 14 If the device is mounted in workshops or garages in which flammable or combustible • lacquers are used, keep a safe distance of at least 4 meters from the source of hazard. If the device is installed in the areas in which spray-painting of any type is •...
- Page 15 Mount the wall holder of the heater on the threaded bolts of the anchors. Place the washers on the threaded bolts and tighten the wall holder with the nuts. Wall Anchor Wall holder CAUTION! The device may be used only in the horizontal position! Change of the inclination WARNING! Burn hazard! During the operation, the heater becomes very hot!
-
Page 16: Operation
Connection DANGER! Electric shock hazard! The device can cause injuries due to improper installation! Before installation and connecting the local power grid specification should be compared with that of the device (see rating plate). Connect the device only in case of compliance! Never connect the device to the power supply before its proper mounting •... - Page 17 Switching the device on Connect the device to a single, grounded socket. • Switch the device on using the main switch on the right side of the device, setting it • to “ON” position. The stand-by mode indicator on the control panel will come on. To switch on individual heating tubes, press ON/OFF switch on the control panel •...
-
Page 18: Cleaning
6. Cleaning WARNING! Before cleaning, switch the device off with the main switch, disconnect the device from the power supply (pull the plug!) and leave the device to cool down. Never clean the device with use of pressurized water jet. Protect the device from the water penetration. -
Page 19: Waste Disposal
Electric devices should be used and disposed of properly to prevent the impact on the environment. Disconnect the device from the power supply and remove the power cord from • the device. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...