Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bartscher ST1800
Summary of Contents for Bartscher ST1800
- Page 1 ST1800 825212 Original-Gebrauchsanleitung V1/1215...
-
Page 2: Table Of Contents
4.2 Technical specification ..................27 5. Installation and operation ..................27 5.1 Installation ......................27 5.2 Operation ......................29 6. Cleaning ........................31 7. Waste disposal ......................32 Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:... -
Page 3: Safety
Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. - Page 4 • Never leave the device unattended when in use. • Never use the device with a programmable switch, timer or an automatic switching device. • This device may only be operated in technically proper and safe condition. • Prevent access of children to the package materials like plastic bags and foamed polystyrene elements.
- Page 5 • Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers. •...
- Page 6 HOT SURFACE! Burn hazard! Follow the safety instructions listed in order to avoid the hazard: • During the operation, the housing and protective grid become very hot, do not touch these elements during the operation of the device. • Also after switching the device off, it remains hot for some time afterwards;...
-
Page 7: Key To Symbols
1.2 Key to symbols In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. WARNING! This symbol highlights hazards which could lead to injury. -
Page 8: Proper Use
1.3 Proper use The operational safety of the device is assured only in case of proper use, according to the operation manual. All technical activities like installation and maintenance must be performed by the qualified service personnel only. Infrared heater is designed for inner and outer spaces, and may be used outdoors and in an enclosed space, provided that the safety instructions presented in this operating manual are observed. -
Page 9: General Information
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors. -
Page 10: Transport, Packaging And Storage
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. -
Page 11: Technical Data
4. Technical data 4.1 Overview of parts Housing Heating tubes of the infrared heater (2) Protective grid Main switch Power cord Control panel Base Remote control - 26 -... -
Page 12: Technical Specification
4.2 Technical specification Name Electrical infrared heater ST1800 825212 Code-No.: Material: Aluminum, stainless steel base 2 heating tubes of the infrared heater, with 900W each (Ruby Red tubes), 2-level switching, (3 settings) Design: Main switch, ON/OFF switch Cable outlet at the rear of the heater,... - Page 13 Setting • Put the device on an even, stable, dry surface which is resistant to high temperature. • Never place the device on an inflammable surface. • Do not place the device near inflammable materials (e.g. curtains) or objects (wardrobe etc.). Risk of fire! •...
-
Page 14: Operation
5.2 Operation • Before the first use, clean the device according to the instructions presented in section 6 „Cleaning“. Control Panel Receiver of infrared signal sent from the remote control (left heating tube) LED heating indicator, left heating tube (red) ON/OFF switch, left heating tube Receiver of infrared signal sent from the remote control (right heating tube) - Page 15 Switching the device on • Connect the device to a single, grounded socket. • Switch the device on using the main switch at the rear of the device. The LED power indicator will come on. • The device is equipped with 2 heating elements of the infrared heater with 2-level switching Level 1: half power –...
-
Page 16: Cleaning
6. Cleaning CAUTION! Disconnect the device from the power supply (unplug!) before cleaning. Let the device cool down. The device is not designed to be rinsed with running water. Do not use a pressure washer to clean the device! Be careful and do not let the water into the device. CAUTION! Never use aggressive or abrasive cleaning agents. -
Page 17: Waste Disposal
CAUTION! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany...
Need help?
Do you have a question about the ST1800 and is the answer not in the manual?
Questions and answers