Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
Page 4
Never use the device with a programmable switch, timer or an automatic switching device. This device may only be operated in technically proper and safe condition. Prevent access of children to the package materials like plastic bags and foamed polystyrene elements.
Page 5
The supply cable must be disconnected from the socket only by pulling the plug. Never carry or lift the device by the supply cable. Never wrap the power cord around the heater. In any case do not open the device housing. In case of electrical or mechanical modifications the electric shock hazard will occur.
Keep children and animals away from the device. Children should never use the heater. WARNING! Fire or explosion hazard! Follow the safety instructions listed in order to avoid the hazard: Do not use the device near the containers holding gas, petrol, paint, spirits, alcohol or inflammable objects.
HOT SURFACE! This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation.
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data 4.1 Technical specification Name Heater W3000 E 825214 Code-No: Housing material: Aluminum 2 infrared heating tubes, with 1500 W each, 2-level switching for wall mounting for indoor and outdoor use wall holder for easy mounting:inclination Design: angle up to 90°...
4.2 Overview of parts Wall holder Ventilation holes Protective fins Housing Main switch Control panel Infrared heating tube, right Infrared heating tube, left - 26 -...
5. Installation and operation 5.1 Installation Unpack the device and remove the packaging material. Check the delivery for completeness. CAUTION! Never remove the type plate and warning signs. Place of installation The heater may be mounted outdoors or in a big, open and well ventilated room. Make sure that in the place of installation the high temperature does not directly affect various obstacles or objects (e.g.
Page 13
If the device is mounted in workshops or garages in which flammable or combustible lacquers are used, keep a safe distance of at least 4 meters from the source of hazard. If the device is installed in the areas in which spray-painting of any type is performed, it cannot be switched on during lacquering.
Page 14
Change of the inclination angle WARNING! Burn hazard! During the operation, the heater becomes very hot! Never change the inclination angle during use! Disconnect the device from the power supply and before changing the inclination angle of the heater, leave it to cool down. ...
5.2 Operation Before the first use, clean the device according to the instructions presented in section 6 “Cleaning”. Control panel ON/OFF switch Operation mode indicator (red) Infrared receiver for the remote control Stand-by mode indicator (red) Switching the device on ...
Heating tubes emitting infrared radiation will immediately start dissipating the heat. HOT SURFACE! Burn hazard! During the operation, the heater becomes very hot. Never touch the device during the operation and immediately after its shutdown After the use, switch the heater off with the main switch located at the right side, switching it to “OFF”...
Electric devices should be used and disposed of properly to prevent the impact on the environment. Disconnect the device from the power supply and remove the power cord from the device. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...