Standard Cmos Features - Gigabyte GA-M55plus-S3G User Manual

2-1

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
IDE Channel 4 Master
IDE Channel 5 Master
Drive A
Floppy 3 Mode Support
Halt On
Base Memory
Extended Memory
Total Memory
: Move Enter: Select
F5: Previous Values
Date
The date format is <week>, <month>, <day>, <year>.
Week
Month
Day
Year
Time
The times format in <hour> <minute> <second>. The time is calculated based on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave devices setup. You can use one of
three methods:
Auto
None
Manual
Access Mode
IDE Channel 2/3/4/5 Master
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
Extended IDE Drive You can use one of the two methods:
Auto
None
GA-M55plus-S3G Motherboard
Standard CMOS Features
Thu, Jun 17 2006
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[Disabled]
[All, But Keyboard]
640K
511M
512M
+/-/PU/PD: Value
F6: Fail-Safe Defaults
The week, from Sun to Sat, determined by the BIOS and is display only
The month, Jan. Through Dec.
The day, from 1 to 31 (or the maximum allowed in the month)
The year, from 1999 through 2098
Allows BIOS to automatically detect IDE devices during POST. (Default
value)
Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
User can manually input the correct settings.
Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
Allows BIOS to automatically detect IDE devices during POST(default)
Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
- 32 -
Item Help
Menu Level
Change the day, month,
year
<Week>
Sun. to Sat.
<Month>
Jan. to Dec.
<Day>
1 to 31 (or maximum
allowed in the month)
<Year>
1999 to 2098
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help