Table of Contents
Advertisement
2 Your SoundBar
Congratulations on your purchase, and
welcome to Philips! To fully benefit from
the support that Philips offers, register your
SoundBar at www.philips.com/welcome.
Indicators on the main unit
This section describes the information of the
LED indicators on the main unit.
a
b
c
d
e
a Volume indicator
• When you change volume, one
or multiple indicators (up to eight
indicators) light up to indicate the
volume level.
Wireless pairing indicators
• During wireless pairing between the
main unit and the surround speakers,
eight indicators blink one by one.
• When the pairing succeeds, eight
indicators light up for three seconds.
• If the pairing fails, eight indicators blink
three times.
b HDMI ARC
• Lights up when you select HDMI ARC
as the input source.
• Blinks when no audio from the
selected HDMI ARC source is
detected, or when an unsupported
audio format is detected.
EN
4
f
g
h
i
c HDMI 1
Lights up when you select HDMI IN 1 as
the input source.
d HDMI 2
Lights up when you select HDMI IN 2 as
the input source.
e OPTICAL/COAX
• Lights up when you switch to optical
• Blinks when an unsupported audio
f AUX
Lights up when you switch to AUX input
source.
g AUDIO-IN
Lights up when you switch to AUDIO-IN
source (3.5mm jack).
h Bluetooth
• Lights up when you switch to
j
• Blinks when you switch to Bluetooth
i V. SURR indicator
• Lights up when surround mode is
• Off when stereo mode is selected.
• Blinks once when night mode/auto
• Blinks twice when Dolby Digital audio
• Blinks twice when night mode/auto
• Blinks three times when DTS audio is
(Standby-On/Standby indicator)
j
When the SoundBar is in standby, the
standby indicator turns red.
or coaxial input source.
format is detected.
Bluetooth mode and Bluetooth devices
are paired.
mode and Bluetooth devices are not
paired.
selected.
volume is enabled.
is input.
volume is disabled.
input.
Advertisement
Table of Contents
