Gigabyte GA-EP45-DS5 User Manual page 94

Copying the SATA RAID/AHCI driver from the motherboard driver disk to a USB flash drive
Step 1:
On an alternative system, copy the SATA RAID/AHCI driver to your USB flash drive from the motherboard
driver disk. For example, to install the Windows Vista 32-bit operating system
SATA controller, copy the MSM32 file (Figure 4) located in the BootDrv folder in the motherboard driver
disk to your USB flash drive.
Step 2:
Double-click the MSM32 file in the USB flash drive. When a screen similar to that in Figure 5 appears,
type "yes" after the "Continue extraction?" message, and then press <Enter> to begin extracting the
driver. After the driver is extracted, a screen similar to that in Figure 6 will appear.
(Note) To install the Windows Vista 64-bit operating system, please copy the MSM64 file.
GA-EP45-DS5 Motherboard
Figure 4
Figure 5
Figure 6
- 94 -
on the Intel ICH10R
(Note)