Configuring Microphone Recording - Gigabyte GA-EP45-DS5 User Manual

B. Windows Vista
Install the Dolby GUI Software driver from the motherboard driver disk. Click the Start icon
to All Programs, Dolby Control Center to access the utility.
(The following illustration demonstrates a 7.1-speaker configuration as an example.)

5-2-4 Configuring Microphone Recording

Step 1:
After installing the audio driver, the Audio Manager
icon will appear in your system tray. Double-
click the icon to access the Audio Control Panel.
Step 2:
Connect your microphone to the Mic in jack (pink)
on the back panel or the Mic in jack (pink) on the front
panel. Then configure the jack for microphone
functionality.
Note: The microphone functions on the front panel
and back panel cannot be used at the same time.
Step 3:
Locate the Volume icon
and click it to open the volume control panel.
GA-EP45-DS5 Motherboard
1.
The system will expand 2-channel audio for a 7.1-channel
surround sound playback.
2.
speaker bass effect.
in your system tray
- 104 -
: Click Dolby Pro Logic IIx.
: Click Natural Bass to enable
. Point