Gigabyte GA-965GM-DS2 User Manual page 69

6. Confirm Creation: After all of the items are configured, the selection bar automatically jumps to the
Confirm Creation item. When prompted to confirm your selections (Figure 9), press Y to confirm
or N to abort.
GIGA-BYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.53
[ Create New RAID ]
Name: JRAID
Level: 0-Stripe
Disks: Select Disk
Block: 128KB
Size: 240GB
Confirm Creation
[ RAID Disk Drive List ]
[ ]-Switch Unit
When finished, the new RAID array will be displayed in the RAID Disk Drive List block (Figure 10).
GIGA-BYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.53
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: JRAID
[ TAB]-Switch Window
[ Hard Disk Drive List ]
Mode Name
HDD0:
HDD1:
[ Help ]
Create RAID on the select HDD(Y/N)?Y
ALL DATA ON THE SELECTED HARD DISK
WILL BE LOST WHEN EXIT WITH SAVING
[DEL,BS]-Delete Number
Figure 9
[ Hard Disk Drive List ]
Mode Name
HDD0: ST3120026AS
HDD1: ST3120026AS
RAID Level
0-Stripe
[ ]-Select RAID
Figure 10
- 69 -
Available
ST3120026AS 120 GB
ST3120026AS 120 GB
CONFIRM RAID CREATION
[ENTER]-Next [ESC]-Abort
Capacity Type/Status
120 GB
120 GB
Capacity Status Members(HDDx)
240 GB Normal 01
[ENTER]-Action [ESC]-Exit
Type/Status
Non-RAID
Non-RAID
RAID Inside
RAID Inside
Appendix