Table of Contents
Advertisement
Exploded View/Disassembly&Assembly Instructions
14
Upper 2POINT
SIZE : 1.4*4.0*2.5
Lower 2POINT
SIZE : 1.4*2.3*2.5
Screwing the screw
1.Screw the upper 2 point of the SLIDE LOWER
using SCREW Assmebly JIG →
SIZE:1.4*4.0*2.5
2.Screw the lower 2 point of the SLIDE LOWER
using SCREW Assmebly JIG →
SIZW:1.4*2.3*2.5
16
GUIDE PIN
EAR PHONE
COVER
Placing the Main key pad
1. Check the printed condition of the MAIN
KEYPAD.
2. Place the MAIN KEYPAD. View <Fig. 1>
18
Switch key
Place VOLUME KEY, SWITCH KEY
-Place both VOLUME KEY and SWITCH KEY.
Be careful not
to damage FPCB
during assembly
SCREW
SCREW
MICRO SD CARD
COVER
Volume key
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
15
Insert Left SCREW CAP
Screw Cap Insertion
1.Insert Left SCREW CAP.
2.Insert Right SCREW CAP.
3.Press the SCREW CAP wi t h Screw Cap JIG
17
Shield Can Assembly
- Assemble the Shield Can just like in the picture
above.
※
Be careful not to rumple and tear the Gasket
When assembling
19
<right position>
VOL KEY BRACKET
-Assemble VOL KEY BRACKET using SCREW JIG
→ SCREW SIZE:1.4*2.3*2.5
※
ssemble the BRACKET right
Be careful to a
position.
5-14
Insert Right SCREW CAP
the shield cover.
<wrong position >
Advertisement
Table of Contents
