Usb Legacy Support - Gigabyte GA-8SKML User Manual

C USB Legacy Support
Enable USB Legacy Support.
8Enabled
Disable USB Legacy Support. (Default v alue)
8Disabled
C On Board LAN Function *
Disable this function.
8Disabled
Enable Onboard Lan Chip function. (Default Value)
8Enabled
CInit Display First
Set Init Display First to AGP. (Default v alue)
8AGP
Set Init Display First to PCI.
8PCI
C Onboard Serial Port A
BIOS w ill automatically setup the port A address.
8Auto
Enable onboard Serial port A and address is 3F8. (Default v alue)
83F8/IRQ4
Enable onboard Serial port A and address is 2F8.
82F8/IRQ3
Enable onboard Serial port A and address is 3E8.
83E8/IRQ4
Enable onboard Serial port A and address is 2E8.
82E8/IRQ3
Disable onboard Serial port A.
8Disabled
C Onboard Serial Port B
BIOS w ill automatically setup the port B address.
8Auto
Enable onboard Serial port B and address is 3F8.
83F8/IRQ4
Enable onboard Serial port B and address is 2F8. (Default v alue)
82F8/IRQ3
Enable onboard Serial port B and address is 3E8.
83E8/IRQ4
Enable onboard Serial port B and address is 2E8.
82E8/IRQ3
Disable onboard Serial port B.
8Disabled
C Serial Port B Mode
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
Set onboard I/O chip UART to ASKIR Mode.
8ASKIR
Set onboard I/O chip UART to IrDA Mode.
8IrDA
Set onboard I/O chip UART to Normal Mode. (Default Value)
8Normal
"*" For GA-8SKML only .
- 33 - BIOS Setup