Canon TS5160 Online Manual page 220

displayed on the LCD. In this case, select
and change the setting.
• The settings of the page size, media type, etc. are retained even if the printer is turned off.
• When copying starts in the copy menu that is not available with the specified setting, The specified
function is not available with current settings. is displayed on the LCD. Change the setting,
following the on-screen instructions.
You can specify the following setting items.
• Copies
Specify the number of copies.
• Magnif. (Magnification)
Specify the reduction/enlargement method.
Reducing/Enlarging Copies
• Intensity
Specify the intensity.
When Auto is selected, the intensity is adjusted automatically according to the originals loaded on the
platen glass.
• Page size
Select the page size of the loaded paper.
• Type (Media type)
Select the media type of the loaded paper.
• Paper src
Select a paper source (Rear tray/Cassette/Auto) where paper is loaded.
Note
• When Auto is selected, paper is fed from the paper source where the paper that matches the
paper settings (page size and media type) is loaded.
• Print qlty (Print quality)
Adjust print quality according to the original.
Important
• If you use Draft with Type set to Plain paper and the quality is not as good as expected, select
Standard or High for Print qlty and try copying again.
• Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays
instead of black or white.
• Layout
Select the layout.
Copying Two Pages onto Single Page
on the upper left on the LCD to check the message
220