Step 2: Install Memory Modules - Gigabyte GA-8LS533 User Manual

Step 2: Install memory modules

The motherboard has 2 dual in-line memory module (DIMM) sockets support 4 banks. The BIOS will
automatically detects memory type and size. To install the memory module, just push it vertically into
the DIMM socket. The DIMM module can only fit in one direction due to the two notch. Memory size
can vary between sockets.
1. The DIMM socket has two notch, so
the DIMM memory module can only fit
in one direction.
3. Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module.
Reverse the installation steps when you wish to remove the DIMM module.
! !
! ! ! When RAM LED is ON, do not install/remove SDRAM from socket.
! ! ! Please note that the DIMM module can only fit in one direction due to the two
! !
notches. Wrong orientation will cause improper installation. Please change
the insert orientation.
GA-8LS533 Series Motherboard
SDRAM
2. Insert the DIMM memory module verti-
cally into the DIMM socket. Then push
it down.
- 12 -